MR105-2RS Miniature Ball Bearing, Sealed

STL Supports CommunityCAD0 downloads
MR105-2RS Miniature Ball Bearing, Sealed
1 / 5

MR105-2RS Miniature Ball Bearing, Sealed

The MR105-2RS miniature ball bearing (MR series, sealed) has a 5 mm bore, a 10 mm outside diameter and a width of 4 mm. Get it as simplified STEP files. Width as the shielded bearing; sealed row not listed by the sources.

MR105-2RS miniature ball bearing, MR series

How these parts are made, and what the levels mean: read the method

  • Also known as: MR105-2RS MR bearing, MR105-2RS miniature deep groove ball bearing, MR105-2RS small ball bearing
  • Model id: bearings-miniature-mr105-2rs
  • Standard: MR series · size MR105

Files

Part keySimplified
bearings-miniature-mr105-2rsSTEP

Dimensions

Dimension symbols for MR105-2RS miniature ball bearings (MR series)

SymbolNameminnommaxModeledRuleLevel
dBore diameter55nominalL1
DOutside diameter1010nominalL1
BWidth44nominalL1
rChamfer dimension0.10.1single limit (min), modeled at the limitL1

Drawing

Drawing of the MR105-2RS miniature ball bearing with its values (MR series)

As a PDF: CC-BRG-MINI-SZ-MR105.pdf.

The MR105-2RS miniature ball bearing beside the MR95-2RS and the MR106-2RS

The MR105-2RS is number 7, counting from the smallest, of the 13 MR series miniature ball bearings published here, from MR63-2RS to MR148-2RS.

  • Bore diameter (d): 5 mm on the MR105-2RS miniature ball bearing, against 5 mm on the MR95-2RS and 6 mm on the MR106-2RS.
  • Outside diameter (D): 10 mm on the MR105-2RS miniature ball bearing, against 9 mm on the MR95-2RS and 10 mm on the MR106-2RS.
  • Width (B): 4 mm on the MR105-2RS miniature ball bearing, against 3 mm on the MR95-2RS and 3 mm on the MR106-2RS.
  • Chamfer dimension (r): at least 0.1 mm on the MR105-2RS miniature ball bearing, the same on the MR95-2RS and the MR106-2RS.

The MR105-2RS miniature ball bearing in its other versions

Other sizes

Conventions

  • Simplified only: rings, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, one face at Z = 0.
  • No markings; tolerance class, clearance and lubricant are not geometry.
  • Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.

Documents

Sources

nmb-miniature, nsk-miniature. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-BRG-MINI-DS-MR105.pdf

CC-BRG-MINI-DS-MR105 rev A Size datasheet - MR105 '?) CommunityCAD MR series MR105 miniature ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold. For 5 mm shafts Part keys bearings-miniature-mr105, bearings - miniature - mr105 -…

View full datasheet →

docs/CC-BRG-MINI-SZ-MR105.pdf

Miniature deep groove ball bearing, MR series, MR105 Size drawing - MR105 values on the views - MR105ZZ shown. Built from: open MR105 - 2Z MR105ZZ - 2RS MR105ZZ - enlarged 5:1 | D = 10.000 View from above Bearing MR105 10.000 MR1052Z 10.000 Source levels Main value = the modeled value (nominal,…

View full datasheet →