DIN 7984 low head socket cap screw, M6
Size drawing - M6 values on the views - | = 16 shown - enlarged 5:1
Source levels
Sym. Dimensi Main value = the modeled value (nominal, else the middle of min-max).
Thread pitch Grey under a value = its min-max, where the source gives both.
9.89 < / = = the source gives only that limit, modeled at it.
9.78-10 ref = reference.
View fro! L2 = the standard itself (or its complete free preview,
Head diameter
Head height 3.91 or the maker's drawing).
3.82-4 L1 = two or more independent sources agree: the release gate. 4.07 g
t=3 Socket across flats LO = one source only: printed amber and marked *.
4.02-4.12 2.88-3.12 c = a source value was corrected; the datasheet says
2 4.58 how. Socket across corners . . . . s=4.07 House convention = a detail no source dimensions, 4.02-4.12 drawn to a stated house rule.
3 Socket depth This size's values: L2 1- L116 - LO 3.
2.88-3.12 Notes r= 0.325*, da <6.8 0.6* s: the nominal is the key size; the socket is modeled at
Head te hamfe 1 0.25-0.4 eae enamier the middle of its band.
Underhead fillet radius
Shank diameter | = 16 shown lengths 10-60
Transition diameter
Bearing face diameter
Thread length < 50° (ISO 4753 CH)
Basic minor diameter (end face)
v Tap drill (method d - P)
d1 = 4.9175
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 7984:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Low head cap screw - M6
SHEET REV SCALE PROJECTION UNITS CC-DIN7984-SZ-M6 A 5:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.