CC-DIN7984-DS-M6 revA Size datasheet - M6
'?) CommunityCAD
DIN 7984 M6 low head socket cap screw
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread M6 x 1, ISO metric coarse, right hand
Lengths 12 generated, | = 10-60
Files 24 STEP AP214 (simplified + threaded)
Simplified - M6x20, front view, 2.5:1 Threaded - M6x20, front view, 2.5:1 Sym. Dimensi Value Level
P Thread pitch 1 La - 3
dk Head diameter 9.89 L1 - 3 9.78-10
k Head height 3.91 L1 - 3 3.82-4
s Socket across flats 4.07 L1- 3 4.02-4.12
e Socket across corners > 4.58 L1 - 3
t Socket depth 3 La: 4 2.88-3.12
Vv Head top chamfer < 0.6% lo -1
r Underhead fillet radius 0.325* lo -1 0.25-0.4
ds Shank diameter 5.91 L1 - 3 5.82-6
da Transition diameter < 6.8 La - 2
dw Bearing face diameter > 9.2* lo-1
b Thread length 18 ref L1-4
di Basic minor diameter (end face) 4.9175 L1-2
tap Tap drill (method d - P) 5 L1- 2
a End chamfer angle, deg < 50
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
DIN 7984:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 1/2 Low head socket cap screw - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
* CC-DIN7984-DS-M6 revA '?) CommunityCAD Size datasheet - M6
Lengths | Thread Is Ig Part key
10 tothe head - - din7984-m6x10
12 tothe head - - din7984-m6x12
16 tothe head - - din7984-m6x16
20 tothe head - - din7984-m6x20
25 tothe head - - din7984-m6x25
30 partial >7 < 12 din7984-m6x30
35 partial 212 $17 din7984-m6x35
40 partial 217 $ 22 din7984-m6x40
45 __ partial > 22 < 27 din7984-m6x45
50 partial 2 27 $ 32 din7984-m6x50
55 partial 2 32 <$ 37. din7984-m6x55
60 partial 2 37 $ 42 din7984-m6x60 Is = plain shank (min), Ig = bearing face to the first full thread (max). To the head: full thread up to the printed Ig max from the bearing face. Is and Ig are one source (fasteners.eu), or past its table Ig = | - b, Is = Ig - 5P (owner decision #823); both LO. Listed by one source only, not generated: |= 8, 14, 18, 70.
Conventions
¢ End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
« Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t.
« Head: plain cylinder at dk, 45° top chamfer at v max, underside edge rounded above dw min; the same on both levels. ¢ Thread (threaded level): ISO 68-1 basic profile; full thread to Ig, quarter-turn fade toward the head.
« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh n/a 7526d25f9381 (kept outside the repo) Standards)
fasten-it-din7984 fasten.it 2026-10-25 6d7c2d071779
fasteners-eu-din7984 fasteners.eu 2026-10-25 Oca229b3badf
fasteners-eu-din7984-lengths fasteners.eu 2026-10-25 Oca229b3badf
pule-din7984-1g CommunityCAD 2026-10-27 12fded2béaca
globalfastener-din7984 globalfastener.com (Internet Archive 2026-10-25 lebfc356fcb2 copy, captured 2026-05-21)
aspen-din7984 Aspen Fasteners 2026-10-25 a89117360Fd6
aspen-din7984-pages Aspen Fasteners 2026-10-26 2c952dad2f07
The whole series (verification map, corrections, drawings): CC-DIN7984-DS.
DIN 7984:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Low head socket cap screw - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.