m2-z15 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m2-z15 Spur Gear, Spur gear
1 / 7

m2-z15 Spur Gear, Spur gear

The m2-z15 spur gear: reference (pitch) diameter 30 mm, tip (outside) diameter 34 mm, root diameter 25 mm. Available as simplified STEP files.

m2-z15 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m2-z15 metric spur gear, m2-z15 involute gear, m2-z15 straight cut gear, m2-z15 pinion
  • Model id: spur-gears-m2-z15
  • Standard: Spur gear · size m2-z15

Files

Part keySimplified
spur-gears-m2-z15STEP

Dimensions

Dimension symbols for m2-z15 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter3030nominalL2
daTip (outside) diameter3434nominalL2
dfRoot diameter2525nominalL0 (nom: one source)
dsBore diameter1212nominalL2
dhHub diameter2424nominalL2
bFace width2020nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter2525nominalL0 (nom: one source)
ds_hpcHPC's bore1515nominalL0 (nom: one source)
LTotal length3030nominalL2

Drawing

Drawing of the m2-z15 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m2-z15.pdf.

The m2-z15 spur gear beside the m1.5-z60 and the m2-z20

The m2-z15 is number 26 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 30 mm on the m2-z15 spur gear, against 90 mm on the m1.5-z60 and 40 mm on the m2-z20.
  • Tip (outside) diameter (da): 34 mm on the m2-z15 spur gear, against 93 mm on the m1.5-z60 and 44 mm on the m2-z20.
  • Root diameter (df): 25 mm on the m2-z15 spur gear, against 86.25 mm on the m1.5-z60 and 35 mm on the m2-z20.
  • Bore diameter (ds): 12 mm on the m2-z15 spur gear, against 15 mm on the m1.5-z60 and 12 mm on the m2-z20.
  • Hub diameter (dh): 24 mm on the m2-z15 spur gear, against 50 mm on the m1.5-z60 and 32 mm on the m2-z20.
  • Face width (b): 20 mm on the m2-z15 spur gear, against 15 mm on the m1.5-z60 and 20 mm on the m2-z20.
  • Hub width (lh): 10 mm on the m2-z15 spur gear, the same on the m1.5-z60 and the m2-z20.
  • HPC's hub (boss) diameter (dh_hpc): 25 mm on the m2-z15 spur gear, against 40 mm on the m1.5-z60 and 30 mm on the m2-z20.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m2-z15.pdf

'?) CommunityCAD CC-SPUR-DS-m2-z15 revA Size datasheet - m2-z15 Module 2, 15 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. m2-z15, end, 0.5:1 da df ds dh Th dhH dsH ha hf c p Dimension Reference (pitch) diameter Tip (outside) diameter Root diameter…

View full datasheet →

docs/CC-SPUR-SZ-m2-z15.pdf

Involute spur gear, ISO 53 basic rack, m2-z15 Size drawing - m2-z15 values on the views - enlarged 2.5:1 @d = 30.00 Reference (pitch) diameter Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC…

View full datasheet →