F692 Flanged Ball Bearing
For a 2 mm shaft and a 6 mm housing bore, the F692 flanged ball bearing (F and MF series) is 2.3 mm wide. Modeled as simplified STEP files. Its flange is 7.5 mm across and 0.6 mm thick.

How these parts are made, and what the levels mean: read the method
- Also known as: F692 flange bearing, F692 MF bearing, F692 F bearing, F692 flanged miniature bearing
- Model id:
bearings-miniature-flanged-f692
- Standard: F and MF series · size F692
Files
| Part key | Simplified |
|---|
bearings-miniature-flanged-f692 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 2 | | 2 | nominal | L1 |
| D | Outside diameter | | 6 | | 6 | nominal | L1 |
| B | Width | | 2.3 | | 2.3 | nominal | L1 |
| r | Chamfer dimension | 0.15 | | | 0.15 | single limit (min), modeled at the limit | L1 |
| D1 | Flange diameter | | 7.5 | | 7.5 | nominal | L1 |
| C1 | Flange width | | 0.6 | | 0.6 | nominal | L1 |
Drawing

As a PDF: CC-BRG-MINI-FL-SZ-F692.pdf.
The F692 flanged ball bearing beside the F682 and the F602
The F692 is number 2 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.
- Bore diameter (d): 2 mm on the F692 flanged ball bearing, the same on the F682 and the F602.
- Outside diameter (D): 6 mm on the F692 flanged ball bearing, against 5 mm on the F682 and 7 mm on the F602.
- Width (B): 2.3 mm on the F692 flanged ball bearing, against 1.5 mm on the F682 and 2.8 mm on the F602.
- Chamfer dimension (r): at least 0.15 mm on the F692 flanged ball bearing, against at least 0.08 mm on the F682 and at least 0.15 mm on the F602.
- Flange diameter (D1): 7.5 mm on the F692 flanged ball bearing, against 6.1 mm on the F682 and 8.5 mm on the F602.
- Flange width (C1): 0.6 mm on the F692 flanged ball bearing, against 0.5 mm on the F682 and 0.7 mm on the F602.
The F692 flanged ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature-flanged, nsk-miniature-flanged, ntn-bearingfinder-miniature-flanged. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...