F698 Flanged Ball Bearing

STL Supports CommunityCAD0 downloads
F698 Flanged Ball Bearing
1 / 5

F698 Flanged Ball Bearing

The F698 flanged ball bearing (F and MF series) has an 8 mm bore, a 19 mm outside diameter and a width of 6 mm. Get it as simplified STEP files. Its flange is 22 mm across and 1.5 mm thick.

F698 flanged ball bearing, F and MF series

How these parts are made, and what the levels mean: read the method

  • Also known as: F698 flange bearing, F698 MF bearing, F698 F bearing, F698 flanged miniature bearing
  • Model id: bearings-miniature-flanged-f698
  • Standard: F and MF series · size F698

Files

Part keySimplified
bearings-miniature-flanged-f698STEP

Dimensions

Dimension symbols for F698 flanged ball bearings (F and MF series)

SymbolNameminnommaxModeledRuleLevel
dBore diameter88nominalL1
DOutside diameter1919nominalL1
BWidth66nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1
D1Flange diameter2222nominalL1
C1Flange width1.51.5nominalL1

Drawing

Drawing of the F698 flanged ball bearing with its values (F and MF series)

As a PDF: CC-BRG-MINI-FL-SZ-F698.pdf.

The F698 flanged ball bearing beside the F688 and the F608

The F698 is number 37 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.

  • Bore diameter (d): 8 mm on the F698 flanged ball bearing, the same on the F688 and the F608.
  • Outside diameter (D): 19 mm on the F698 flanged ball bearing, against 16 mm on the F688 and 22 mm on the F608.
  • Width (B): 6 mm on the F698 flanged ball bearing, against 4 mm on the F688 and 7 mm on the F608.
  • Chamfer dimension (r): at least 0.3 mm on the F698 flanged ball bearing, against at least 0.2 mm on the F688 and at least 0.3 mm on the F608.
  • Flange diameter (D1): 22 mm on the F698 flanged ball bearing, against 18 mm on the F688 and 25 mm on the F608.
  • Flange width (C1): 1.5 mm on the F698 flanged ball bearing, against 1 mm on the F688 and 1.5 mm on the F608.

The F698 flanged ball bearing in its other versions

Other sizes

Conventions

  • Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
  • No markings; tolerance class, clearance and lubricant are not geometry.
  • Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.

Documents

Sources

nmb-miniature-flanged, nsk-miniature-flanged, ntn-bearingfinder-miniature-flanged. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-BRG-MINI-FL-DS-F698.pdf

CC-BRG-MINI-FL-DS-F698 rev A Size datasheet - F698 '?) CommunityCAD F and MF series F698 flanged miniature ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, a row per product as sold. For 8 mm shafts Part keys bearings - miniature - flanged- £698,…

View full datasheet →

docs/CC-BRG-MINI-FL-SZ-F698.pdf

Flanged miniature deep groove ball bearing, F and MF series, F698 Size drawing - F698 values on the views - F698ZZ shown. Built from: open F698 - 2Z F698ZZ - 2RS F698DD - enlarged 5:1 Bearing F698 d= 8.000 F698ZZ F698DD | D = 19.000 T Source levels | | | Main value = the modeled value (nominal,…

View full datasheet →