F696 Flanged Ball Bearing
For a 6 mm shaft and a 15 mm housing bore, the F696 flanged ball bearing (F and MF series) is 5 mm wide. Modeled as simplified STEP files. Its flange is 17 mm across and 1.2 mm thick.

How these parts are made, and what the levels mean: read the method
- Also known as: F696 flange bearing, F696 MF bearing, F696 F bearing, F696 flanged miniature bearing
- Model id:
bearings-miniature-flanged-f696
- Standard: F and MF series · size F696
Files
| Part key | Simplified |
|---|
bearings-miniature-flanged-f696 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 6 | | 6 | nominal | L1 |
| D | Outside diameter | | 15 | | 15 | nominal | L1 |
| B | Width | | 5 | | 5 | nominal | L1 |
| r | Chamfer dimension | 0.2 | | | 0.2 | single limit (min), modeled at the limit | L1 |
| D1 | Flange diameter | | 17 | | 17 | nominal | L1 |
| C1 | Flange width | | 1.2 | | 1.2 | nominal | L1 |
Drawing

As a PDF: CC-BRG-MINI-FL-SZ-F696.pdf.
The F696 flanged ball bearing beside the F686 and the F606
The F696 is number 26 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.
- Bore diameter (d): 6 mm on the F696 flanged ball bearing, the same on the F686 and the F606.
- Outside diameter (D): 15 mm on the F696 flanged ball bearing, against 13 mm on the F686 and 17 mm on the F606.
- Width (B): 5 mm on the F696 flanged ball bearing, against 3.5 mm on the F686 and 6 mm on the F606.
- Chamfer dimension (r): at least 0.2 mm on the F696 flanged ball bearing, against at least 0.15 mm on the F686 and at least 0.3 mm on the F606.
- Flange diameter (D1): 17 mm on the F696 flanged ball bearing, against 15 mm on the F686 and 19 mm on the F606.
- Flange width (C1): 1.2 mm on the F696 flanged ball bearing, against 1 mm on the F686 and 1.2 mm on the F606.
The F696 flanged ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature-flanged, nsk-miniature-flanged, ntn-bearingfinder-miniature-flanged. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...