Enclosed Switching Power Supply, Mean Well RS-25

zip Supports CommunityCAD0 downloads
Enclosed Switching Power Supply, Mean Well RS-25
1 / 5

Enclosed Switching Power Supply, Mean Well RS-25

The Mean Well RS-25 power supply (Mean Well RS and SE/NES): length 78 mm, width 51 mm, height 28 mm. Available as simplified and threaded STEP files.

Mean Well RS-25 power supply, Mean Well RS and SE/NES

This model is CommunityCAD's own, drawn from Mean Well's published drawing; Mean Well did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Mean Well RS-25 switching power supply, Mean Well RS-25 enclosed power supply, Mean Well RS-25 SMPS, Mean Well RS-25 LED driver power supply, Mean Well RS-25 printer power supply
  • Model id: psu-meanwell-rs-25
  • Standard: Mean Well RS and SE/NES · size Mean Well RS-25

Files

Part keySimplifiedThreaded
psu-meanwell-rs-25STEPSTEP

Dimensions

Dimension symbols for Mean Well RS-25 power supplies (Mean Well RS and SE/NES)

SymbolNameminnommaxModeledRuleLevel
LLength7878nominalL2
WWidth5151nominalL2
HHeight2828nominalL2
tgGeneral tolerance11nominalL2
dbBottom hole thread33nominalL2
nbNumber of bottom holes22nominalL2
tbBottom hole depth33nominalL2
xbeBottom holes from the far end1111nominalL2
pxbBottom hole pitch along5555nominalL2
ybBottom holes from the front face25.425.4nominalL2
dsSide hole thread33nominalL2
nsNumber of side holes22nominalL2
xseSide holes from the far end2.752.75nominalL2
pxsSide hole pitch along66.566.5nominalL2
zsSide hole height1414nominalL2
ptTerminal pitch7.627.62nominalL2
wtTerminal opening66nominalL2
ntNumber of terminals55nominalL2
tovStrip overhang1414single limit (max), modeled at the limitL2

Drawing

Drawing of the Mean Well RS-25 power supply with its values (Mean Well RS and SE/NES)

As a PDF: CC-PSURS-SZ-rs-25.pdf.

The Mean Well RS-25 power supply beside the Mean Well RS-15 and the Mean Well RS-50

The Mean Well RS-25 is number 2 of the 5 Mean Well RS and SE/NES power supplies published here, listed from Mean Well RS-15 to Mean Well SE-350 / NES-350.

  • Length (L): 78 mm on the Mean Well RS-25 power supply, against 62.5 mm on the Mean Well RS-15 and 99 mm on the Mean Well RS-50.
  • Width (W): 51 mm on the Mean Well RS-25 power supply, against 51 mm on the Mean Well RS-15 and 97 mm on the Mean Well RS-50.
  • Height (H): 28 mm on the Mean Well RS-25 power supply, against 28 mm on the Mean Well RS-15 and 36 mm on the Mean Well RS-50.
  • General tolerance (tg): 1 mm on the Mean Well RS-25 power supply, the same on the Mean Well RS-15 and the Mean Well RS-50.
  • Bottom hole thread (db): 3 mm on the Mean Well RS-25 power supply, the same on the Mean Well RS-15 and the Mean Well RS-50.
  • Number of bottom holes (nb): 2 on the Mean Well RS-25 power supply, the same on the Mean Well RS-15 and the Mean Well RS-50.
  • Bottom hole depth (tb): 3 mm on the Mean Well RS-25 power supply, against 3 mm on the Mean Well RS-15 and 4 mm on the Mean Well RS-50.
  • Bottom holes from the far end (xbe): 11 mm on the Mean Well RS-25 power supply, against 14.65 mm on the Mean Well RS-15.

Other sizes

Conventions

  • STEP AP214, millimetres, the bottom face at Z = 0, the case centred on the origin, the length along X with the terminal end toward +X.

Documents

Sources

meanwell-rs-25. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...