BK2526 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
BK2526 Needle Bearing, ISO 3245
1 / 5

BK2526 Needle Bearing, ISO 3245

The BK2526 needle bearing (ISO 3245) has a 25 mm bore, a 32 mm outside diameter and a width of 26 mm. Get it as simplified STEP files.

BK2526 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: BK2526 drawn cup needle roller bearing, BK2526 needle roller bearing, BK2526 drawn cup bearing
  • Model id: iso3245-bk2526
  • Standard: ISO 3245 · size BK2526

Files

Part keySimplified
iso3245-bk2526STEP

Dimensions

Dimension symbols for BK2526 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers2525nominalL1
DOutside diameter3232nominalL1
CWidth2626nominalL1
CtDepth to the closed end23.323.3single limit (min), modeled at the limitL1
rChamfer dimension0.80.8single limit (min), modeled at the limitL1

Drawing

Drawing of the BK2526 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-BK-SZ-BK2526.pdf.

The BK2526 needle bearing beside the BK2520

The BK2526 is the last of the 29 ISO 3245 needle bearings published here, listed from BK0306 to BK2526.

  • Bore diameter under the rollers (Fw): 25 mm on the BK2526 needle bearing, the same on the BK2520.
  • Outside diameter (D): 32 mm on the BK2526 needle bearing, the same on the BK2520.
  • Width (C): 26 mm on the BK2526 needle bearing, against 20 mm on the BK2520.
  • Depth to the closed end (Ct): at least 23.3 mm on the BK2526 needle bearing, against at least 17.3 mm on the BK2520.
  • Chamfer dimension (r): at least 0.8 mm on the BK2526 needle bearing, the same on the BK2520.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup with a closed end and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, the open face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-bk, ntn-bearingfinder-bk, schaeffler-hr1-bk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-BK-DS-BK2526.pdf

. CC-1$03245-BK-DS-BK2526 rev A 0 CommunityCAD Size datasheet - BK2526 ISO 3245 BK2526 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 25 mm shafts running directly on the rollers, closing a housing bore Ht Part key is03245…

View full datasheet →

docs/CC-ISO3245-BK-SZ-BK2526.pdf

ISO 3245 drawn cup needle roller bearing, closed end (BK), BK2526 Size drawing - BK2526 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 2:1 Bearing BK2526 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →