BK2212 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
BK2212 Needle Bearing, ISO 3245
1 / 5

BK2212 Needle Bearing, ISO 3245

The BK2212 needle bearing (ISO 3245) has a 22 mm bore, a 28 mm outside diameter and a width of 12 mm. Get it as simplified STEP files.

BK2212 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: BK2212 drawn cup needle roller bearing, BK2212 needle roller bearing, BK2212 drawn cup bearing
  • Model id: iso3245-bk2212
  • Standard: ISO 3245 · size BK2212

Files

Part keySimplified
iso3245-bk2212STEP

Dimensions

Dimension symbols for BK2212 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers2222nominalL1
DOutside diameter2828nominalL1
CWidth1212nominalL1
CtDepth to the closed end9.39.3single limit (min), modeled at the limitL1
rChamfer dimension0.80.8single limit (min), modeled at the limitL1

Drawing

Drawing of the BK2212 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-BK-SZ-BK2212.pdf.

The BK2212 needle bearing beside the BK2020 and the BK2216

The BK2212 is number 25 of the 29 ISO 3245 needle bearings published here, listed from BK0306 to BK2526.

  • Bore diameter under the rollers (Fw): 22 mm on the BK2212 needle bearing, against 20 mm on the BK2020 and 22 mm on the BK2216.
  • Outside diameter (D): 28 mm on the BK2212 needle bearing, against 26 mm on the BK2020 and 28 mm on the BK2216.
  • Width (C): 12 mm on the BK2212 needle bearing, against 20 mm on the BK2020 and 16 mm on the BK2216.
  • Depth to the closed end (Ct): at least 9.3 mm on the BK2212 needle bearing, against at least 17.3 mm on the BK2020 and at least 13.3 mm on the BK2216.
  • Chamfer dimension (r): at least 0.8 mm on the BK2212 needle bearing, the same on the BK2020 and the BK2216.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup with a closed end and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, the open face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-bk, ntn-bearingfinder-bk, schaeffler-hr1-bk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-BK-DS-BK2212.pdf

. CC-1$03245-BK-DS-BK2212 rev A 0 CommunityCAD Size datasheet - BK2212 ISO 3245 BK2212 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 22 mm shafts running directly on the rollers, closing a housing bore Part key iso3245-bk2212…

View full datasheet →

docs/CC-ISO3245-BK-SZ-BK2212.pdf

ISO 3245 drawn cup needle roller bearing, closed end (BK), BK2212 Size drawing - BK2212 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 2:1 Bearing BK2212 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →