BK2016 Needle Bearing, ISO 3245

zip Supports CommunityCAD0 downloads
BK2016 Needle Bearing, ISO 3245
1 / 5

BK2016 Needle Bearing, ISO 3245

The BK2016 needle bearing (ISO 3245) has a 20 mm bore, a 26 mm outside diameter and a width of 16 mm. Get it as simplified STEP files.

BK2016 needle bearing, ISO 3245

How these parts are made, and what the levels mean: read the method

  • Also known as: BK2016 drawn cup needle roller bearing, BK2016 needle roller bearing, BK2016 drawn cup bearing
  • Model id: iso3245-bk2016
  • Standard: ISO 3245 · size BK2016

Files

Part keySimplified
iso3245-bk2016STEP

Dimensions

Dimension symbols for BK2016 needle bearings (ISO 3245)

SymbolNameminnommaxModeledRuleLevel
FwBore diameter under the rollers2020nominalL1
DOutside diameter2626nominalL1
CWidth1616nominalL1
CtDepth to the closed end13.313.3single limit (min), modeled at the limitL1
rChamfer dimension0.80.8single limit (min), modeled at the limitL1

Drawing

Drawing of the BK2016 needle bearing with its values (ISO 3245)

As a PDF: CC-ISO3245-BK-SZ-BK2016.pdf.

The BK2016 needle bearing beside the BK1816 and the BK2020

The BK2016 is number 23 of the 29 ISO 3245 needle bearings published here, listed from BK0306 to BK2526.

  • Bore diameter under the rollers (Fw): 20 mm on the BK2016 needle bearing, against 18 mm on the BK1816 and 20 mm on the BK2020.
  • Outside diameter (D): 26 mm on the BK2016 needle bearing, against 24 mm on the BK1816 and 26 mm on the BK2020.
  • Width (C): 16 mm on the BK2016 needle bearing, against 16 mm on the BK1816 and 20 mm on the BK2020.
  • Depth to the closed end (Ct): at least 13.3 mm on the BK2016 needle bearing, against at least 13.3 mm on the BK1816 and at least 17.3 mm on the BK2020.
  • Chamfer dimension (r): at least 0.8 mm on the BK2016 needle bearing, the same on the BK1816 and the BK2020.

Other sizes

Conventions

  • Simplified only: an illustrative drawn cup with a closed end and needle rollers, no cage. STEP AP214, millimetres, Z along the axis, the open face at Z = 0.
  • Illustrative needle rollers, no cage: diameter (D - Fw)/2 less the wall, touching Fw, as many as fit at a pitch of 1.25 roller diameters.
  • No markings; tolerances, radial clearance and lubricant are not geometry.

Documents

Sources

koyo-bs007-bk, ntn-bearingfinder-bk, schaeffler-hr1-bk. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO3245-BK-DS-BK2016.pdf

. CC-1$03245-BK-DS-BK2016 rev A 0 CommunityCAD Size datasheet - BK2016 ISO 3245 BK2016 drawn cup needle roller bearing Size datasheet: this bearing's values with their levels, conventions and sources. For 20 mm shafts running directly on the rollers, closing a housing alan bore ton tea Part key…

View full datasheet →

docs/CC-ISO3245-BK-SZ-BK2016.pdf

ISO 3245 drawn cup needle roller bearing, closed end (BK), BK2016 Size drawing - BK2016 values on the views - Cup and needle rollers illustrative, not any maker's design - enlarged 2:1 Bearing BK2016 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a…

View full datasheet →