9x15 Shim Washer (Shim Ring), DIN 988

Made for 9x15 screws, this shim washer (DIN 988) has a 9 mm hole and is 15 mm across. Download it as 6 lengths from 0.1 to 1.2 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 9x15 shim ring, 9x15 x 0.1 to 9x15 x 1.2 shim rings
• Model id: din988-9x15
• Standard: DIN 988:1990-03 · size 9x15

Lengths

Length (mm)	Part key	Simplified
0.1	din988-9x15x0-1	STEP
0.2	din988-9x15x0-2	STEP
0.3	din988-9x15x0-3	STEP
0.5	din988-9x15x0-5	STEP
1	din988-9x15x1	STEP
1.2	din988-9x15x1-2	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d1	Inside diameter		9		9	nominal	L1
d2	Outside diameter		15		15	nominal	L1

Drawing

As a PDF: CC-DIN988-SZ-9x15.pdf.

The 9x15 shim washer beside the 8x14 and the 10x16

The 9x15 is number 7 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

• Inside diameter (d1): 9 mm on the 9x15 shim washer, against 8 mm on the 8x14 and 10 mm on the 10x16.
• Outside diameter (d2): 15 mm on the 9x15 shim washer, against 14 mm on the 8x14 and 16 mm on the 10x16.

Other sizes

• One size smaller: 8x14 Shim Washer (Shim Ring), DIN 988, 8 mm hole, 14 mm OD.
• One size larger: 10x16 Shim Washer (Shim Ring), DIN 988, 10 mm hole, 16 mm OD.

Documents

• CC-DIN988-DS-9x15.pdf: 9x15 datasheet: values with levels, lengths, sources
• CC-DIN988-SZ-9x15.pdf: 9x15 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

fasten-it-din988, fasteners-eu-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.