11x17 Shim Washer (Shim Ring), DIN 988

Made for 11x17 screws, this shim washer (DIN 988) has an 11 mm hole and is 17 mm across. Download it as 2 lengths from 0.2 to 1 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 11x17 shim ring, 11x17 x 0.2 to 11x17 x 1 shim rings
• Model id: din988-11x17
• Standard: DIN 988:1990-03 · size 11x17

Lengths

Length (mm)	Part key	Simplified
0.2	din988-11x17x0-2	STEP
1	din988-11x17x1	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d1	Inside diameter		11		11	nominal	L1
d2	Outside diameter		17		17	nominal	L1

Drawing

As a PDF: CC-DIN988-SZ-11x17.pdf.

The 11x17 shim washer beside the 10x16 and the 12x18

The 11x17 is number 9 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

• Inside diameter (d1): 11 mm on the 11x17 shim washer, against 10 mm on the 10x16 and 12 mm on the 12x18.
• Outside diameter (d2): 17 mm on the 11x17 shim washer, against 16 mm on the 10x16 and 18 mm on the 12x18.

Other sizes

• One size smaller: 10x16 Shim Washer (Shim Ring), DIN 988, 10 mm hole, 16 mm OD.
• One size larger: 12x18 Shim Washer (Shim Ring), DIN 988, 12 mm hole, 18 mm OD.

Documents

• CC-DIN988-DS-11x17.pdf: 11x17 datasheet: values with levels, lengths, sources
• CC-DIN988-SZ-11x17.pdf: 11x17 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

fasten-it-din988, fasteners-eu-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.