5x10 Shim Washer (Shim Ring), DIN 988

Made for 5x10 screws, this shim washer (DIN 988) has a 5 mm hole and is 10 mm across. Download it as 5 lengths from 0.1 to 1 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 5x10 shim ring, 5x10 x 0.1 to 5x10 x 1 shim rings
• Model id: din988-5x10
• Standard: DIN 988:1990-03 · size 5x10

Lengths

Length (mm)	Part key	Simplified
0.1	din988-5x10x0-1	STEP
0.2	din988-5x10x0-2	STEP
0.3	din988-5x10x0-3	STEP
0.5	din988-5x10x0-5	STEP
1	din988-5x10x1	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d1	Inside diameter		5		5	nominal	L1
d2	Outside diameter		10		10	nominal	L1

Drawing

As a PDF: CC-DIN988-SZ-5x10.pdf.

The 5x10 shim washer beside the 4x8 and the 6x12

The 5x10 is number 3 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

• Inside diameter (d1): 5 mm on the 5x10 shim washer, against 4 mm on the 4x8 and 6 mm on the 6x12.
• Outside diameter (d2): 10 mm on the 5x10 shim washer, against 8 mm on the 4x8 and 12 mm on the 6x12.

Other sizes

• One size smaller: 4x8 Shim Washer (Shim Ring), DIN 988, 4 mm hole, 8 mm OD.
• One size larger: 6x12 Shim Washer (Shim Ring), DIN 988, 6 mm hole, 12 mm OD.

Documents

• CC-DIN988-DS-5x10.pdf: 5x10 datasheet: values with levels, lengths, sources
• CC-DIN988-SZ-5x10.pdf: 5x10 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

fasten-it-din988, fasteners-eu-din988, schrauben-lexikon-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.