7 mm E-clip (E-ring), DIN 6799

For shafts of 8 to 11 mm grooved to 7 mm: the E-clip (DIN 6799), 0.9 mm thick, with an installed outer diameter up to 14.3 mm. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: 7 mm E-clip
• Model id: din6799-d7
• Standard: DIN 6799:2017 · size 7 mm

Files

Part key	Simplified
din6799-d7	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
s	Clip thickness		0.9		0.9	nominal	L1
s_lim	Clip thickness, limits	0.88		0.92	0.9	midpoint of min–max	L0 (min, max: one source)
a	Mouth width		5.84		5.84	nominal	L1
a_lim	Mouth width, limits	5.792		5.888	5.84	midpoint of min–max	L0 (min, max: one source)
d3	Outer diameter, installed			14.3	14.3	single limit (max), modeled at the limit	L1
d2	Groove diameter		7		7	nominal	L1
d1	Shaft diameter range	8		11	9.5	midpoint of min–max	L1
m	Groove width		0.94		0.94	nominal	L1
n	Groove edge margin	1.5			1.5	single limit (min), modeled at the limit	L1

Drawing

As a PDF: CC-DIN6799-SZ-7.pdf.

The 7 mm E-clip beside the 6 mm and the 8 mm

The 7 mm is number 6, counting from the smallest, of the 11 DIN 6799 E-clips published here, from 2.3 mm to 15 mm.

• Clip thickness (s): 0.9 mm on the 7 mm E-clip, against 0.7 mm on the 6 mm and 1 mm on the 8 mm.
• Clip thickness, limits (s_lim): 0.88 to 0.92 mm on the 7 mm E-clip, against 0.68 to 0.72 mm on the 6 mm and 0.97 to 1.03 mm on the 8 mm.
• Mouth width (a): 5.84 mm on the 7 mm E-clip, against 5.26 mm on the 6 mm and 6.52 mm on the 8 mm.
• Mouth width, limits (a_lim): 5.792 to 5.888 mm on the 7 mm E-clip, against 5.212 to 5.308 mm on the 6 mm and 6.462 to 6.578 mm on the 8 mm.
• Outer diameter, installed (d3): up to 14.3 mm on the 7 mm E-clip, against up to 12.3 mm on the 6 mm and up to 16.3 mm on the 8 mm.
• Groove diameter (d2): 7 mm on the 7 mm E-clip, against 6 mm on the 6 mm and 8 mm on the 8 mm.
• Shaft diameter range (d1): 8 to 11 mm on the 7 mm E-clip, against 7 to 9 mm on the 6 mm and 9 to 12 mm on the 8 mm.
• Groove width (m): 0.94 mm on the 7 mm E-clip, against 0.74 mm on the 6 mm and 1.05 mm on the 8 mm.

Other sizes

• One size smaller: 6 mm E-clip (E-ring), DIN 6799, 6 mm groove, shaft 7 to 9 mm, 0.7 mm thick.
• One size larger: 8 mm E-clip (E-ring), DIN 6799, 8 mm groove, shaft 9 to 12 mm, 1 mm thick.

Documents

• CC-DIN6799-DS-7.pdf: 7 datasheet: values with levels, sources
• CC-DIN6799-SZ-7.pdf: 7 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

fasten-it-din6799, fasteners-eu-din6799, kipp-k1940. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.