10 mm E-clip (E-ring), DIN 6799

The 10 mm E-clip (DIN 6799) clips into a 10 mm groove on a shaft of 11 to 15 mm, and is 1.2 mm thick. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: 10 mm E-clip
• Model id: din6799-d10
• Standard: DIN 6799:2017 · size 10 mm

Files

Part key	Simplified
din6799-d10	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
s	Clip thickness		1.2		1.2	nominal	L1
s_lim	Clip thickness, limits	1.17		1.23	1.2	midpoint of min–max	L0 (min, max: one source)
a	Mouth width		8.32		8.32	nominal	L1
a_lim	Mouth width, limits	8.262		8.378	8.32	midpoint of min–max	L0 (min, max: one source)
d3	Outer diameter, installed			20.4	20.4	single limit (max), modeled at the limit	L1
d2	Groove diameter		10		10	nominal	L1
d1	Shaft diameter range	11		15	13	midpoint of min–max	L1
m	Groove width		1.25		1.25	nominal	L1
n	Groove edge margin	2			2	single limit (min), modeled at the limit	L1

Drawing

As a PDF: CC-DIN6799-SZ-10.pdf.

The 10 mm E-clip beside the 9 mm and the 12 mm

The 10 mm is number 9, counting from the smallest, of the 11 DIN 6799 E-clips published here, from 2.3 mm to 15 mm.

• Clip thickness (s): 1.2 mm on the 10 mm E-clip, against 1.1 mm on the 9 mm and 1.3 mm on the 12 mm.
• Clip thickness, limits (s_lim): 1.17 to 1.23 mm on the 10 mm E-clip, against 1.07 to 1.13 mm on the 9 mm and 1.27 to 1.33 mm on the 12 mm.
• Mouth width (a): 8.32 mm on the 10 mm E-clip, against 7.63 mm on the 9 mm and 10.45 mm on the 12 mm.
• Mouth width, limits (a_lim): 8.262 to 8.378 mm on the 10 mm E-clip, against 7.572 to 7.688 mm on the 9 mm and 10.38 to 10.52 mm on the 12 mm.
• Outer diameter, installed (d3): up to 20.4 mm on the 10 mm E-clip, against up to 18.8 mm on the 9 mm and up to 23.4 mm on the 12 mm.
• Groove diameter (d2): 10 mm on the 10 mm E-clip, against 9 mm on the 9 mm and 12 mm on the 12 mm.
• Shaft diameter range (d1): 11 to 15 mm on the 10 mm E-clip, against 10 to 14 mm on the 9 mm and 13 to 18 mm on the 12 mm.
• Groove width (m): 1.25 mm on the 10 mm E-clip, against 1.15 mm on the 9 mm and 1.35 mm on the 12 mm.

Other sizes

• One size smaller: 9 mm E-clip (E-ring), DIN 6799, 9 mm groove, shaft 10 to 14 mm, 1.1 mm thick.
• One size larger: 12 mm E-clip (E-ring), DIN 6799, 12 mm groove, shaft 13 to 18 mm, 1.3 mm thick.

Documents

• CC-DIN6799-DS-10.pdf: 10 datasheet: values with levels, sources
• CC-DIN6799-SZ-10.pdf: 10 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

fasten-it-din6799, fasteners-eu-din6799, kipp-k1940. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.