6201, 6201-2Z, 6201-2RS Ball Bearing, ISO 15
For a 12 mm shaft and a 32 mm housing bore, the 6201 ball bearing (ISO 15) is 10 mm wide. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also searched as: 6201 bearing, 6201-2Z bearing, 6201-2RS bearing
- Model id:
iso15-6201
- Standard: ISO 15 · size 6201
Versions
| Designation | What differs | Part key | Simplified |
|---|
| 6201 | open | iso15-6201 | STEP |
| 6201-2Z | 2Z (shielded) | iso15-6201-2z | STEP |
| 6201-2RS | 2RS (sealed) | iso15-6201-2rs | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 12 | | 12 | nominal | L1 |
| D | Outside diameter | | 32 | | 32 | nominal | L1 |
| B | Width | | 10 | | 10 | nominal | L1 |
| r | Chamfer dimension | 0.6 | | | 0.6 | single limit (min), modeled at the limit | L1 |
Drawing

As a PDF: CC-ISO15-SZ-6201.pdf.
Load ratings and speeds
What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.
- Basic Load Ratings, Cr: 7500 N
- Basic Load Ratings, C0r: 3050 N
- Limiting Speeds, Grease: 26000 min-1
- Limiting Speeds, Oil (Oil-bath): 32000 min-1
The 6201 ball bearing beside the 6001 and the 6301
The 6201 is number 34 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.
- Bore diameter (d): 12 mm on the 6201 ball bearing, the same on the 6001 and the 6301.
- Outside diameter (D): 32 mm on the 6201 ball bearing, against 28 mm on the 6001 and 37 mm on the 6301.
- Width (B): 10 mm on the 6201 ball bearing, against 8 mm on the 6001 and 12 mm on the 6301.
- Chamfer dimension (r): at least 0.6 mm on the 6201 ball bearing, against at least 0.3 mm on the 6001 and at least 1 mm on the 6301.
Other sizes
Documents
Sources
nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.