5x8 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

For a 5 mm shaft in an 8 mm housing bore, this 5x8 sintered bronze bushing (ISO 2795) presses in and runs on the oil in its sintered wall. Modeled as 3 lengths from 4 to 8 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 5x8 bushing, 5x8 x 4 to 5x8 x 8 bushings
• Model id: iso2795-c-5x8
• Standard: ISO 2795:2020 · size 5x8

Lengths

Length (mm)	Part key	Simplified
4	iso2795-c-5x8x4	STEP
5	iso2795-c-5x8x5	STEP
8	iso2795-c-5x8x8	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d	Inside diameter		5		5	nominal	L2
D	Outside diameter		8		8	nominal	L2
C	Chamfer, maximum			0.3	0.3	single limit (max), modeled at the limit	L2
C_angle	Chamfer angle		45		45	nominal	L1

Drawing

As a PDF: CC-ISO2795-SZ-5x8.pdf.

The 5x8 sintered bronze bushing beside the 5x9 and the 6x10

The 5x8 is number 8 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.

• Inside diameter (d): 5 mm on the 5x8 sintered bronze bushing, against 5 mm on the 5x9 and 6 mm on the 6x10.
• Outside diameter (D): 8 mm on the 5x8 sintered bronze bushing, against 9 mm on the 5x9 and 10 mm on the 6x10.
• Chamfer, maximum (C): up to 0.3 mm on the 5x8 sintered bronze bushing, the same on the 5x9 and the 6x10.
• Chamfer angle (C_angle): 45° on the 5x8 sintered bronze bushing, the same on the 5x9 and the 6x10.

Other sizes

• One size smaller: 5x9 Sintered Bronze Bushing (Oilite Bushing), ISO 2795, 5 mm bore, 9 mm OD.
• One size larger: 6x10 Sintered Bronze Bushing (Oilite Bushing), ISO 2795, 6 mm bore, 10 mm OD.

Documents

• CC-ISO2795-DS-5x8.pdf: 5x8 datasheet: values with levels, lengths, sources
• CC-ISO2795-SZ-5x8.pdf: 5x8 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

bowman-iso2795-plain, iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.