ISO 2795 sintered bronze bush, cylindrical, 5x8
Size drawing - 5x8 values on the views - L = 5 shown; lengths 4, 5, 8 - enlarged 10:1
L = 5 shown lengths 4-8
C < 0.3, a = 45°
D=8
View from above
5x8
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 3-111.
Notes
Sizes are d x D: normal and thin-wall series side by side, as in Table 1.
L: the size's lengths in Table 1, each its own file; the views show the middle one.
C is within the owner's quarter-wall cap at every size here, so it is modeled as given.
TITLE
'? CommunityCAD Size drawing, 5x8
‘STANDARDS FOLLOWED ISO 2795:2020
FAMILY / DETAIL
Sintered bronze bush, cylindrical - 5x8
SHEET
CC-1802795-SZ-5x8 A 10:1
REV SCALE PROJECTION
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
70b2bf787ea8F07904ce030afSObcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.