Brushed DC can motor, can class, 540
Size drawing - 540 values on the views - enlarged 2:1
Sym. Dimensi
35.8
Can diameter
@B = 13.0 Body length 50.0
@d = 3.175 67.0 refx
Overall length, not modeled
Shaft length from the mounting face ISO)
Shaft diameter
Front boss diameter
Front boss height
Rear boss diameter
Rear boss height
Mounting hole spacing
Number of mounting holes
Mounting hole thread
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18 - LO 4.
Notes
No published standard: each maker's drawing is its own lineage (ADR 0034). Where makers differ, the largest stated (ADR 0134 row 4).
End cap, bell, vents, terminals and mark illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, 540
STANDARDS FOLLOWED FAMILY / DETAIL Makers' drawings (Mabuchi, Johnson Electric, AndyMark); no published standard Brushed DC can motor - 540
SHEET REV SCALE PROJECTION UNITS
CC-DCMOTOR-SZ-540 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
