A 3 mm D-shaft, 10 mm long, leaves the 12.5 mm gearbox of the 12.5 micro metal gearmotor (N20 gearmotor), whose gearbox is 12 × 10 mm and fixed by two M1.6 holes 9 mm apart. Here as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 12.5 micro gear motor, 12.5 mini gearmotor, 12.5 small DC gear motor
- Model id:
gearmotors-n20-12-5
- Standard: N20 gearmotor · size 12.5
Files
| Part key | Simplified |
|---|
gearmotors-n20-12-5 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| W | Gearbox width | | 12 | | 12 | nominal | L1 |
| H | Gearbox height | | 10 | | 10 | nominal | L1 |
| Lg | Gearbox length | | 12.5 | | 12.5 | nominal | L1 |
| Lm | Motor length | | 15 | | 15 | nominal | L1 |
| OL | Overall length | | | 29.1 | 29.1 | single limit (max), modeled at the limit | L0 (max: one source) |
| Dm | Motor width | | 12 | | 12 | nominal | L1 |
| E | Shaft length | | 10 | | 10 | nominal | L1 |
| d | Shaft diameter | | 3 | | 3 | nominal | L1 |
| f | Shaft across the flat | | 2.5 | | 2.5 | nominal | L1 |
| B | Front boss diameter | | 4 | | 4 | nominal | L1 |
| h | Front boss height | | 0.8 | | 0.8 | nominal | L1 |
| dt | Mounting hole thread | | 1.6 | | 1.6 | nominal | L1 |
| nh | Number of mounting holes | | 2 | | 2 | nominal | L1 |
| e | Mounting hole offset | | 4.5 | | 4.5 | nominal | L0 (nom: one source) |
| A | Mounting hole spacing | | 9 | | 9 | nominal | L0 (nom: one source) |
| Br | Rear boss diameter | | 5 | | 5 | nominal | L0 (nom: one source) |
| hr | Rear end height | | 1.2 | | 1.2 | nominal | L0 (nom: one source) |
| dr | Rear shaft diameter | | 1 | | 1 | nominal | L0 (nom: one source) |
| lr | Rear shaft length | | 5 | | 5 | nominal | L0 (nom: one source) |
| pt | Terminal spacing | | 6.9 | | 6.9 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-N20-SZ-12.5.pdf.
What each maker states
- Gearbox length Lg: the makers differ (Pololu 12.5 mm, TT Motor 12.0 mm). The model uses the largest stated, 12.5 mm, so a mount or enclosure made to it clears every maker's motor.
- Front boss height h: the makers differ (Pololu 0.7 mm, TT Motor 0.8 mm). The model uses the largest stated, 0.8 mm, so a mount or enclosure made to it clears every maker's motor.
- This size's can is 15 mm. Motraxx's 15.1 mm can is drawn on its 9 mm box only, so the 12.5 mm box's can is 15 mm, though the motor behind both boxes is the same. Left at the defaults of the open decision (#1372); check your own motor's can if it matters.
The 12.5 is the last of the 2 N20 gearmotor micro metal gearmotors published here, listed from 9 to 12.5.
- Gearbox width (W): 12 mm on the 12.5 micro metal gearmotor, the same on the 9.
- Gearbox height (H): 10 mm on the 12.5 micro metal gearmotor, the same on the 9.
- Gearbox length (Lg): 12.5 mm on the 12.5 micro metal gearmotor, against 9 mm on the 9.
- Motor length (Lm): 15 mm on the 12.5 micro metal gearmotor, against 15.1 mm on the 9.
- Overall length (OL): up to 29.1 mm on the 12.5 micro metal gearmotor, against up to 25.6 mm on the 9.
- Motor width (Dm): 12 mm on the 12.5 micro metal gearmotor, the same on the 9.
- Shaft length (E): 10 mm on the 12.5 micro metal gearmotor, the same on the 9.
- Shaft diameter (d): 3 mm on the 12.5 micro metal gearmotor, the same on the 9.
Other sizes
- One size smaller: 9 Micro Metal Gearmotor, N20, 12 × 10 mm gearbox, 9 mm long, 3 mm D-shaft, M1.6 mounting holes 9 mm apart, Handson Technology, Motraxx, Pololu and TT Motor data.
Conventions
- Simplified only: eight solids, the gearbox, the gears, the can, the end cap, two solder tabs, the polarity dot and the shaft (nine with the extended rear shaft). STEP AP214, millimetres, the gearbox's front face at Z = 0 centred on the shaft's axis, the shaft along +Z.
- The gearbox's front face at Z = 0, the shaft along +Z, the motor toward -Z, the mounting holes on the X axis; tapped holes are plain bores at the thread's nominal diameter.
Documents
Sources
pololu-micro-metal-gearmotors, ttmotor-gm12-n20va, ttmotor-gm12-n20va-figures. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...