1.2 mm Split Pin (Cotter Pin), ISO 1234
A 1.2 mm split pin (ISO 1234). Here in 9 lengths from 8 to 25 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also searched as: 1.2 mm split pin, 1.2 mm x 8 to 1.2 mm x 25 split pins
- Model id:
iso1234-d1-2
- Standard: ISO 1234:1997 · size 1.2 mm
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 8 | iso1234-d1-2x8 | STEP |
| 10 | iso1234-d1-2x10 | STEP |
| 12 | iso1234-d1-2x12 | STEP |
| 14 | iso1234-d1-2x14 | STEP |
| 16 | iso1234-d1-2x16 | STEP |
| 18 | iso1234-d1-2x18 | STEP |
| 20 | iso1234-d1-2x20 | STEP |
| 22 | iso1234-d1-2x22 | STEP |
| 25 | iso1234-d1-2x25 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Pin diameter | 0.9 | | 1 | 0.95 | midpoint of min–max | L2 |
| a | Extended prong | 1.25 | | 2.5 | 1.875 | midpoint of min–max | L2 |
| b | Eye length | | 3 ref | | 3 | reference value | L2 |
| c | Eye width | 1.7 | | 2 | 1.85 | midpoint of min–max | L2 |
Drawing

As a PDF: CC-ISO1234-SZ-1.2.pdf.
The 1.2 mm split pin beside the 1 mm and the 1.6 mm
The 1.2 mm is number 4, counting from the smallest, of the 6 ISO 1234 split pins published here, from 0.6 mm to 2 mm.
- Pin diameter (d): 0.9 to 1 mm on the 1.2 mm split pin, against 0.8 to 0.9 mm on the 1 mm and 1.3 to 1.4 mm on the 1.6 mm.
- Extended prong (a): 1.25 to 2.5 mm on the 1.2 mm split pin, against 0.8 to 1.6 mm on the 1 mm and 1.25 to 2.5 mm on the 1.6 mm.
- Eye length (b): 3 mm (reference) on the 1.2 mm split pin, against 3 mm (reference) on the 1 mm and 3.2 mm (reference) on the 1.6 mm.
- Eye width (c): 1.7 to 2 mm on the 1.2 mm split pin, against 1.6 to 1.8 mm on the 1 mm and 2.4 to 2.8 mm on the 1.6 mm.
Other sizes
Documents
Sources
amesweb-iso1234, fasten-it-iso1234, fasteners-eu-iso1234, iso1234-1997-sample. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.