1.6 mm Split Pin (Cotter Pin), ISO 1234

STEP · STL Supports CommunityCAD0 downloads
1.6 mm Split Pin (Cotter Pin), ISO 1234
1 / 6

1.6 mm Split Pin (Cotter Pin), ISO 1234

This page has 11 lengths from 8 to 32 mm, each as simplified STEP of the 1.6 mm split pin (ISO 1234).

1.6 mm split pin, 10 mm long, ISO 1234

How these parts are made, and what the levels mean: read the method

  • Also searched as: 1.6 mm split pin, 1.6 mm x 8 to 1.6 mm x 32 split pins
  • Model id: iso1234-d1-6
  • Standard: ISO 1234:1997 · size 1.6 mm

Lengths

Length (mm)Part keySimplified
8iso1234-d1-6x8STEP
10iso1234-d1-6x10STEP
12iso1234-d1-6x12STEP
14iso1234-d1-6x14STEP
16iso1234-d1-6x16STEP
18iso1234-d1-6x18STEP
20iso1234-d1-6x20STEP
22iso1234-d1-6x22STEP
25iso1234-d1-6x25STEP
28iso1234-d1-6x28STEP
32iso1234-d1-6x32STEP

Dimensions

Dimension symbols for 1.6 mm split pins (ISO 1234)

SymbolNameminnommaxModeledRuleLevel
dPin diameter1.31.41.35midpoint of min–maxL2
aExtended prong1.252.51.875midpoint of min–maxL2
bEye length3.2 ref3.2reference valueL2
cEye width2.42.82.6midpoint of min–maxL2

Drawing

Drawing of the 1.6 mm split pin with its values (ISO 1234)

As a PDF: CC-ISO1234-SZ-1.6.pdf.

The 1.6 mm split pin beside the 1.2 mm and the 2 mm

The 1.6 mm is number 5, counting from the smallest, of the 6 ISO 1234 split pins published here, from 0.6 mm to 2 mm.

  • Pin diameter (d): 1.3 to 1.4 mm on the 1.6 mm split pin, against 0.9 to 1 mm on the 1.2 mm and 1.7 to 1.8 mm on the 2 mm.
  • Extended prong (a): 1.25 to 2.5 mm on the 1.6 mm split pin, the same on the 1.2 mm and the 2 mm.
  • Eye length (b): 3.2 mm (reference) on the 1.6 mm split pin, against 3 mm (reference) on the 1.2 mm and 4 mm (reference) on the 2 mm.
  • Eye width (c): 2.4 to 2.8 mm on the 1.6 mm split pin, against 1.7 to 2 mm on the 1.2 mm and 3.2 to 3.6 mm on the 2 mm.

Other sizes

Documents

Sources

amesweb-iso1234, fasten-it-iso1234, fasteners-eu-iso1234, iso1234-1997-sample. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO1234-DS-1.6.pdf

. CC-1S01234-DS-1.6revA '?) CommunityCAD Size datasheet - 1.6 ISO 1234 split pin, size 1.6 Size datasheet: the split pin for a 1.6 mm hole. This size's values with their levels, its lengths, conventions and sources. Size For a 1.6 mm hole; pin (-\) @1.35 mm, eye 2.6 x 3.2 \V/ ~ Lengths 11…

View full datasheet →

docs/CC-ISO1234-SZ-1.6.pdf

ISO 1234 split pin, 1.6 Size drawing - 1.6 values on the views - | = 10 shown - enlarged 10:1 |= 10 shown lengths 8-32 bearing point d=1.35 1341.4 ends square cut (end form not specified) Sym. | Nominal size le @) 1.35 1.3-1.4 Pin diameter, across both legs 1.875 1.25-2.50 Extended prong (long leg…

View full datasheet →