12x1 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
12x1 Disc Magnet, Neodymium
1 / 5

12x1 Disc Magnet, Neodymium

The 12x1 disc magnet (Neodymium disc magnet) is 12 mm across and 1 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

12x1 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 12x1 round magnet, 12x1 rare earth magnet, 12x1 button magnet, 12x1 neodymium magnet
  • Model id: magnets-disc-12x1
  • Standard: Neodymium disc magnet · size 12x1

Files

Part keySimplified
magnets-disc-12x1STEP

Dimensions

Dimension symbols for 12x1 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter1212nominalL1
HHeight11nominalL1

Drawing

Drawing of the 12x1 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-12x1.pdf.

What each maker states

  • supermagnete lists this size in N42.
  • first4magnets lists this size in N35, N42.
  • The shape is the same in any grade.

The 12x1 disc magnet beside the 10x10 and the 12x2

The 12x1 is number 35 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 12 mm on the 12x1 disc magnet, against 10 mm on the 10x10 and 12 mm on the 12x2.
  • Height (H): 1 mm on the 12x1 disc magnet, against 10 mm on the 10x10 and 2 mm on the 12x2.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-DS-12x1.pdf

* CC-MAGDISC-DS-12x1 revA '?) CommunityCAD Size datasheet - 12x1 12 x 71mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade | Part key magnets-disc-12x1 Files 1 STEP AP214 (simplified)…

View full datasheet →

docs/CC-MAGDISC-SZ-12x1.pdf

Neodymium disc magnet, diameter x height, 12x1 Size drawing - 12x1 values on the views - enlarged 8:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / =…

View full datasheet →