10x1 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
10x1 Disc Magnet, Neodymium
1 / 5

10x1 Disc Magnet, Neodymium

The 10x1 disc magnet (Neodymium disc magnet) is 10 mm across and 1 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

10x1 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 10x1 round magnet, 10x1 rare earth magnet, 10x1 button magnet, 10x1 neodymium magnet
  • Model id: magnets-disc-10x1
  • Standard: Neodymium disc magnet · size 10x1

Files

Part keySimplified
magnets-disc-10x1STEP

Dimensions

Dimension symbols for 10x1 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter1010nominalL1
HHeight11nominalL1

Drawing

Drawing of the 10x1 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-10x1.pdf.

What each maker states

  • supermagnete lists this size in N35.
  • first4magnets lists this size in N35, N42.
  • The shape is the same in any grade.

The 10x1 disc magnet beside the 9x3 and the 10x1.5

The 10x1 is number 27 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 10 mm on the 10x1 disc magnet, against 9 mm on the 9x3 and 10 mm on the 10x1.5.
  • Height (H): 1 mm on the 10x1 disc magnet, against 3 mm on the 9x3 and 1.5 mm on the 10x1.5.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-DS-10x1.pdf

* CC-MAGDISC-DS-10x1 revA '?) CommunityCAD Size datasheet - 10x1 10 x 1mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Files 1 STEP AP214 (simplified) 10x1, pole face, 2:1 10x1,…

View full datasheet →

docs/CC-MAGDISC-SZ-10x1.pdf

Neodymium disc magnet, diameter x height, 10x1 Size drawing - 10x1 values on the views - enlarged 8:1 Dimension Diameter mi Height, magnetised axis LCCi—ié*zs fet Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source…

View full datasheet →