m1.5-z25 Spur Gear, Spur gear

STEP · STL Supports CommunityCAD0 downloads
m1.5-z25 Spur Gear, Spur gear
1 / 7

m1.5-z25 Spur Gear, Spur gear

The m1.5-z25 spur gear: reference (pitch) diameter 37.5 mm, tip (outside) diameter 40.5 mm, root diameter 33.75 mm. Available as simplified STEP files.

m1.5-z25 spur gear, Spur gear

This model is CommunityCAD's own, drawn from KHK's published drawing; KHK did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: m1.5-z25 metric spur gear, m1.5-z25 involute gear, m1.5-z25 straight cut gear, m1.5-z25 pinion
  • Model id: spur-gears-m1-5-z25
  • Standard: Spur gear · size m1.5-z25

Files

Part keySimplified
spur-gears-m1-5-z25STEP

Dimensions

Dimension symbols for m1.5-z25 spur gears (Spur gear)

SymbolNameminnommaxModeledRuleLevel
dReference (pitch) diameter37.537.5nominalL2
daTip (outside) diameter40.540.5nominalL2
dfRoot diameter33.7533.75nominalL0 (nom: one source)
dsBore diameter88nominalL2
dhHub diameter3030nominalL2
bFace width1515nominalL2
lhHub width1010nominalL2
dh_hpcHPC's hub (boss) diameter2525nominalL0 (nom: one source)
ds_hpcHPC's bore1010nominalL0 (nom: one source)
LTotal length2525nominalL2

Drawing

Drawing of the m1.5-z25 spur gear with its values (Spur gear)

As a PDF: CC-SPUR-SZ-m1.5-z25.pdf.

The m1.5-z25 spur gear beside the m1.5-z20 and the m1.5-z30

The m1.5-z25 is number 21 of the 32 Spur gears published here, listed from m0.5-z15 to m2-z60.

  • Reference (pitch) diameter (d): 37.5 mm on the m1.5-z25 spur gear, against 30 mm on the m1.5-z20 and 45 mm on the m1.5-z30.
  • Tip (outside) diameter (da): 40.5 mm on the m1.5-z25 spur gear, against 33 mm on the m1.5-z20 and 48 mm on the m1.5-z30.
  • Root diameter (df): 33.75 mm on the m1.5-z25 spur gear, against 26.25 mm on the m1.5-z20 and 41.25 mm on the m1.5-z30.
  • Bore diameter (ds): 8 mm on the m1.5-z25 spur gear, against 8 mm on the m1.5-z20 and 10 mm on the m1.5-z30.
  • Hub diameter (dh): 30 mm on the m1.5-z25 spur gear, against 24 mm on the m1.5-z20 and 38 mm on the m1.5-z30.
  • Face width (b): 15 mm on the m1.5-z25 spur gear, the same on the m1.5-z20 and the m1.5-z30.
  • Hub width (lh): 10 mm on the m1.5-z25 spur gear, the same on the m1.5-z20 and the m1.5-z30.
  • HPC's hub (boss) diameter (dh_hpc): 25 mm on the m1.5-z25 spur gear, against 20 mm on the m1.5-z20 and 25 mm on the m1.5-z30.

Other sizes

Conventions

  • One level: one steel solid with true involute teeth. STEP AP214, millimetres, the bore on Z, the toothed band's plain face at z = 0, the hub toward +Z, a tooth centred on +X.
  • Nominal teeth: the tooth as thick as the space on the reference circle (pi m / 2), no backlash allowance; real gears are cut slightly thinner for backlash.
  • Plain bore only: KHK's tapped (set screw) and keyway variants are not modeled.

Documents

Sources

hpc-steel-spur-gears, khk-ss-spur-gears, misumi-eu-gears. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-SPUR-DS-m1-5-z25.pdf

'?) CommunityCAD CC-SPUR-DS-m1-5-z25 revA Size datasheet - m1.5-225 Module 1.5, 25 teeth, spur gear Size datasheet: this size's values with their levels, conventions and sources. m1.5-z25, end, 0.5:1 da df ds dh Th dhH dsH ha hf c p Dimension Reference (pitch) diameter Tip (outside) diameter Root…

View full datasheet →

docs/CC-SPUR-SZ-m1.5-z25.pdf

Involute spur gear, ISO 53 basic rack, m1.5-z25 Size drawing - m1.5-z25 values on the views - enlarged 2.5:1 @d = 37.50 Reference (pitch) diameter Tip (outside) diameter Root diameter Bore diameter (KHK, L2) Hub diameter (KHK, L2) Face width (KHK, L2) Hub width (KHK, L2) Total length (KHK, L2) HPC…

View full datasheet →