Four Beam Shaft Coupling, Ruland PCMR16-5-5

STL Supports CommunityCAD0 downloads
Four Beam Shaft Coupling, Ruland PCMR16-5-5
1 / 6

Four Beam Shaft Coupling, Ruland PCMR16-5-5

The Ruland PCMR16-5-5 shaft coupling: outside diameter 15.9 mm, overall length 20.3 mm, small bore 5 mm. Available as simplified STEP files.

Ruland PCMR16-5-5 shaft coupling, Shaft coupling

This model is CommunityCAD's own, drawn from Ruland's published drawing; Ruland did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Ruland PCMR16-5-5 shaft coupler, Ruland PCMR16-5-5 motor coupler, Ruland PCMR16-5-5 beam coupling, Ruland PCMR16-5-5 flexible coupling, Ruland PCMR16-5-5 rigid coupling
  • Model id: shaft-couplers-ruland-pcmr16-5-5
  • Standard: Shaft coupling · size Ruland PCMR16-5-5

Files

Part keySimplified
shaft-couplers-ruland-pcmr16-5-5STEP

Dimensions

Dimension symbols for Ruland PCMR16-5-5 shaft couplings (Shaft coupling)

SymbolNameminnommaxModeledRuleLevel
DOutside diameter15.915.9nominalL2
LOverall length20.320.3nominalL2
d1Small bore55nominalL2
d2Large bore55nominalL2
MClamp screw thread22nominalL2

Drawing

Drawing of the Ruland PCMR16-5-5 shaft coupling with its values (Shaft coupling)

As a PDF: CC-COUPLER-SZ-ruland-pcmr16-5-5.pdf.

The Ruland PCMR16-5-5 shaft coupling beside the Ruland MCLX-8-8 and the Ruland PCMR22-8-5

The Ruland PCMR16-5-5 is number 3 of the 11 Shaft couplings published here, listed from Ruland MCLX-5-5 to Misumi CPRC20-8-8.

  • Outside diameter (D): 15.9 mm on the Ruland PCMR16-5-5 shaft coupling, against 24 mm on the Ruland MCLX-8-8 and 22.2 mm on the Ruland PCMR22-8-5.
  • Overall length (L): 20.3 mm on the Ruland PCMR16-5-5 shaft coupling, against 35 mm on the Ruland MCLX-8-8 and 27 mm on the Ruland PCMR22-8-5.
  • Small bore (d1): 5 mm on the Ruland PCMR16-5-5 shaft coupling, against 8 mm on the Ruland MCLX-8-8 and 5 mm on the Ruland PCMR22-8-5.
  • Large bore (d2): 5 mm on the Ruland PCMR16-5-5 shaft coupling, against 8 mm on the Ruland MCLX-8-8 and 8 mm on the Ruland PCMR22-8-5.
  • Clamp screw thread (M): 2 mm on the Ruland PCMR16-5-5 shaft coupling, against 3 mm on the Ruland MCLX-8-8 and 3 mm on the Ruland PCMR22-8-5.

Other sizes

Conventions

  • Simplified only: the coupler body and its clamp screws as separate solids. STEP AP214, millimetres, the bores on Z, the small bore's end face at z = 0.
  • Illustrative, not dimensioned by the maker: the chamfers, the slits' widths where not given, the screw pockets, the screws' lengths, Ruland's screw places, the PCMR hubs and helical beams, and the CPLCN flexure slits.

Documents

Sources

ruland-beam-couplings. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...