5x3 Disc Magnet, Neodymium
The 5x3 disc magnet (Neodymium disc magnet) is 5 mm across and 3 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 5x3 round magnet, 5x3 rare earth magnet, 5x3 button magnet, 5x3 neodymium magnet
- Model id:
magnets-disc-5x3
- Standard: Neodymium disc magnet · size 5x3
Files
| Part key | Simplified |
|---|
magnets-disc-5x3 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Diameter | | 5 | | 5 | nominal | L1 |
| H | Height | | 3 | | 3 | nominal | L1 |
Drawing

As a PDF: CC-MAGDISC-SZ-5x3.pdf.
What each maker states
- supermagnete lists this size in N42.
- first4magnets lists this size in N35, N42, N45.
- The shape is the same in any grade.
The 5x3 disc magnet beside the 5x2 and the 5x4
The 5x3 is number 13 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.
- Diameter (D): 5 mm on the 5x3 disc magnet, the same on the 5x2 and the 5x4.
- Height (H): 3 mm on the 5x3 disc magnet, against 2 mm on the 5x2 and 4 mm on the 5x4.
Other sizes
- One size smaller: 5x2 Disc Magnet, Neodymium, 5 mm across, 2 mm high, nickel-plated, axially magnetised.
- One size larger: 5x4 Disc Magnet, Neodymium, 5 mm across, 4 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...