5x1 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
5x1 Disc Magnet, Neodymium
1 / 5

5x1 Disc Magnet, Neodymium

The 5x1 disc magnet (Neodymium disc magnet) is 5 mm across and 1 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

5x1 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 5x1 round magnet, 5x1 rare earth magnet, 5x1 button magnet, 5x1 neodymium magnet
  • Model id: magnets-disc-5x1
  • Standard: Neodymium disc magnet · size 5x1

Files

Part keySimplified
magnets-disc-5x1STEP

Dimensions

Dimension symbols for 5x1 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter55nominalL1
HHeight11nominalL1

Drawing

Drawing of the 5x1 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-5x1.pdf.

What each maker states

  • supermagnete lists this size in N45.
  • first4magnets lists this size in N35, N42.
  • The shape is the same in any grade.

The 5x1 disc magnet beside the 4x4 and the 5x2

The 5x1 is number 11 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 5 mm on the 5x1 disc magnet, against 4 mm on the 4x4 and 5 mm on the 5x2.
  • Height (H): 1 mm on the 5x1 disc magnet, against 4 mm on the 4x4 and 2 mm on the 5x2.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-DS-5x1.pdf

'?) CommunityCAD CC-MAGDISC-DS-5x1 rev A Size datasheet - 5x1 5 x 1mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade LL vents magnets ieee Files 1 STEP AP214 (simplified) 5x1, pole…

View full datasheet →

docs/CC-MAGDISC-SZ-5x1.pdf

Neodymium disc magnet, diameter x height, 5x1 Size drawing - 5x1 values on the views - enlarged 8:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = =…

View full datasheet →