6x3 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
6x3 Disc Magnet, Neodymium
1 / 5

6x3 Disc Magnet, Neodymium

6 mm across and 3 mm high, the 6x3 disc magnet (Neodymium disc magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

6x3 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 6x3 round magnet, 6x3 rare earth magnet, 6x3 button magnet, 6x3 neodymium magnet
  • Model id: magnets-disc-6x3
  • Standard: Neodymium disc magnet · size 6x3

Files

Part keySimplified
magnets-disc-6x3STEP

Dimensions

Dimension symbols for 6x3 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter66nominalL1
HHeight33nominalL1

Drawing

Drawing of the 6x3 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-6x3.pdf.

What each maker states

  • supermagnete lists this size in N45.
  • first4magnets lists this size in N35, N42.
  • The shape is the same in any grade.

The 6x3 disc magnet beside the 6x2 and the 6x4

The 6x3 is number 18 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 6 mm on the 6x3 disc magnet, the same on the 6x2 and the 6x4.
  • Height (H): 3 mm on the 6x3 disc magnet, against 2 mm on the 6x2 and 4 mm on the 6x4.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-DS-6x3.pdf

'?) CommunityCAD CC-MAGDISC-DS-6x3 rev A Size datasheet - 6x3 6 x 3 mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Part key magnets-disc-6x3 Files 1 STEP AP214 (simplified) 6x3,…

View full datasheet →

docs/CC-MAGDISC-SZ-6x3.pdf

Neodymium disc magnet, diameter x height, 6x3 Size drawing - 6x3 values on the views - enlarged 8:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = =…

View full datasheet →