3x1 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
3x1 Disc Magnet, Neodymium
1 / 5

3x1 Disc Magnet, Neodymium

The 3x1 disc magnet (Neodymium disc magnet) is 3 mm across and 1 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

3x1 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 3x1 round magnet, 3x1 rare earth magnet, 3x1 button magnet, 3x1 neodymium magnet
  • Model id: magnets-disc-3x1
  • Standard: Neodymium disc magnet · size 3x1

Files

Part keySimplified
magnets-disc-3x1STEP

Dimensions

Dimension symbols for 3x1 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter33nominalL1
HHeight11nominalL1

Drawing

Drawing of the 3x1 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-3x1.pdf.

What each maker states

  • supermagnete lists this size in N48.
  • first4magnets lists this size in N35, N42.
  • The shape is the same in any grade.

The 3x1 disc magnet beside the 2x2 and the 3x2

The 3x1 is number 3 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 3 mm on the 3x1 disc magnet, against 2 mm on the 2x2 and 3 mm on the 3x2.
  • Height (H): 1 mm on the 3x1 disc magnet, against 2 mm on the 2x2 and 2 mm on the 3x2.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-DS-3x1.pdf

'?) CommunityCAD CC-MAGDISC-DS-3x1 rev A Size datasheet - 3x1 3 x 1mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade C7] Part key magnets-disc-3x1 Files 1 STEP AP214 (simplified) 3x1,…

View full datasheet →

docs/CC-MAGDISC-SZ-3x1.pdf

Neodymium disc magnet, diameter x height, 3x1 Size drawing - 3x1 values on the views - enlarged 8:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = =…

View full datasheet →