30x10x5 Block Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
30x10x5 Block Magnet, Neodymium
1 / 5

30x10x5 Block Magnet, Neodymium

The 30x10x5 block magnet (Neodymium block magnet) is 30 mm long, 10 mm wide and 5 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

30x10x5 block magnet, Neodymium block magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 30x10x5 bar magnet, 30x10x5 rectangular magnet, 30x10x5 rare earth magnet, 30x10x5 neodymium magnet
  • Model id: magnets-block-30x10x5
  • Standard: Neodymium block magnet · size 30x10x5

Files

Part keySimplified
magnets-block-30x10x5STEP

Dimensions

Dimension symbols for 30x10x5 block magnets (Neodymium block magnet)

SymbolNameminnommaxModeledRuleLevel
LLength3030nominalL1
WWidth1010nominalL1
HHeight55nominalL1

Drawing

Drawing of the 30x10x5 block magnet with its values (Neodymium block magnet)

As a PDF: CC-MAGBLOCK-SZ-30x10x5.pdf.

What each maker states

  • supermagnete lists this size in N42.
  • first4magnets lists this size in N42.
  • The shape is the same in any grade.

The 30x10x5 block magnet beside the 20x20x10 and the 40x10x5

The 30x10x5 is number 17 of the 21 Neodymium block magnets published here, listed from 5x1.5x1 to 46x30x10.

  • Length (L): 30 mm on the 30x10x5 block magnet, against 20 mm on the 20x20x10 and 40 mm on the 40x10x5.
  • Width (W): 10 mm on the 30x10x5 block magnet, against 20 mm on the 20x20x10 and 10 mm on the 40x10x5.
  • Height (H): 5 mm on the 30x10x5 block magnet, against 10 mm on the 20x20x10 and 5 mm on the 40x10x5.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the pole face L x W, L along X and W along Y.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-block, supermagnete-magnets-block. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGBLOCK-SZ-30x10x5.pdf

Neodymium block magnet, length x width x height, 30x10x5 Size drawing - 30x10x5 values on the views - enlarged 6:1 |: Dimension 30x10x5 Length, the longer side Width, the other side Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey…

View full datasheet →

docs/CC-MAGBLOCK-DS-30x10x5.pdf

* CC-MAGBLOCK-DS-30x10x5 rev A '?) CommunityCAD Size datasheet - 30x10x5 30 x 10 x 5mm neodymium block magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Cj Part key magnets-block-30x10x5 Files 1 STEP…

View full datasheet →