34x118 Stepper Motor, NEMA ICS 16
The 34x118 stepper motor (NEMA ICS 16) is a NEMA 34 frame: a body 86 mm square and 118 mm long, four 6.5 mm holes 69.597 mm apart, a 73.025 mm pilot and a 12.7 mm shaft 37.1 mm long. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 34x118 NEMA stepper, 34x118 hybrid stepper motor, 34x118 stepping motor
- Model id:
nema-steppers-34x118
- Standard: NEMA ICS 16 · size 34x118
Files
| Part key | Simplified |
|---|
nema-steppers-34x118 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 118 | | 118 | nominal | L0 (nom: one source) |
| BD | Body square | | 86 | | 86 | nominal | L1 |
| A | Mounting hole spacing | | 69.597 | | 69.597 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dh | Mounting hole diameter | | 6.5 | | 6.5 | nominal | L1 |
| N | Pilot diameter | | 73.025 | | 73.025 | nominal | L1 |
| T | Pilot height | 1.524 | 2.03 | 3.302 | 2.03 | nominal | L1 |
| D | Shaft diameter | | 12.7 | | 12.7 | nominal | L1 |
| E | Shaft length | | 37.1 | | 37.1 | nominal | L1 |
| F | Shaft flat | | 11.4 | | 11.4 | nominal | L0 (nom: one source) |
| Lf | Flat length | | 25.4 | | 25.4 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-NEMA-SZ-34x118.pdf.
The 34x118 stepper motor beside the 34x98
The 34x118 is the last of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 118 mm on the 34x118 stepper motor, against 98 mm on the 34x98.
- Body square (BD): 86 mm on the 34x118 stepper motor, the same on the 34x98.
- Mounting hole spacing (A): 69.597 mm on the 34x118 stepper motor, the same on the 34x98.
- Number of mounting holes (nh): 4 on the 34x118 stepper motor, the same on the 34x98.
- Mounting hole diameter (dh): 6.5 mm on the 34x118 stepper motor, the same on the 34x98.
- Pilot diameter (N): 73.025 mm on the 34x118 stepper motor, the same on the 34x98.
- Pilot height (T): 2.03 mm on the 34x118 stepper motor, the same on the 34x98.
- Shaft diameter (D): 12.7 mm on the 34x118 stepper motor, the same on the 34x98.
Other sizes
- One size smaller: 34x98 Stepper Motor, NEMA ICS 16, NEMA 34, 86 mm square, 98 mm long, 12.7 mm shaft, 6.5 mm mounting holes 69.597 mm apart, Anaheim Automation, Leadshine, Lin Engineering and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
anaheim-34y, anaheim-34y-figures, engineersedge-ics16-inch-flanges, leadshine-cm-steppers, lin-8718s-05s-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...