34x98 Stepper Motor, NEMA ICS 16
NEMA 34, 98 mm body: the 34x98 stepper motor (NEMA ICS 16) has four 6.5 mm holes 69.597 mm apart, a 73.025 mm pilot and a 12.7 mm shaft. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 34x98 NEMA stepper, 34x98 hybrid stepper motor, 34x98 stepping motor
- Model id:
nema-steppers-34x98
- Standard: NEMA ICS 16 · size 34x98
Files
| Part key | Simplified |
|---|
nema-steppers-34x98 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 98 | | 98 | nominal | L0 (nom: one source) |
| BD | Body square | | 86 | | 86 | nominal | L1 |
| A | Mounting hole spacing | | 69.597 | | 69.597 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dh | Mounting hole diameter | | 6.5 | | 6.5 | nominal | L1 |
| N | Pilot diameter | | 73.025 | | 73.025 | nominal | L1 |
| T | Pilot height | 1.524 | 2.03 | 3.302 | 2.03 | nominal | L1 |
| D | Shaft diameter | | 12.7 | | 12.7 | nominal | L1 |
| E | Shaft length | | 37.1 | | 37.1 | nominal | L1 |
| F | Shaft flat | | 11.4 | | 11.4 | nominal | L0 (nom: one source) |
| Lf | Flat length | | 25.4 | | 25.4 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-NEMA-SZ-34x98.pdf.
The 34x98 stepper motor beside the 34x80 and the 34x118
The 34x98 is number 18 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 98 mm on the 34x98 stepper motor, against 80 mm on the 34x80 and 118 mm on the 34x118.
- Body square (BD): 86 mm on the 34x98 stepper motor, the same on the 34x80 and the 34x118.
- Mounting hole spacing (A): 69.597 mm on the 34x98 stepper motor, the same on the 34x80 and the 34x118.
- Number of mounting holes (nh): 4 on the 34x98 stepper motor, the same on the 34x80 and the 34x118.
- Mounting hole diameter (dh): 6.5 mm on the 34x98 stepper motor, the same on the 34x80 and the 34x118.
- Pilot diameter (N): 73.025 mm on the 34x98 stepper motor, the same on the 34x80 and the 34x118.
- Pilot height (T): 2.03 mm on the 34x98 stepper motor, the same on the 34x80 and the 34x118.
- Shaft diameter (D): 12.7 mm on the 34x98 stepper motor, the same on the 34x80 and the 34x118.
Other sizes
- One size smaller: 34x80 Stepper Motor, NEMA ICS 16, NEMA 34, 86 mm square, 80 mm long, 12.7 mm shaft, 6.5 mm mounting holes 69.597 mm apart, Anaheim Automation, Leadshine, Lin Engineering and MOONS' data.
- One size larger: 34x118 Stepper Motor, NEMA ICS 16, NEMA 34, 86 mm square, 118 mm long, 12.7 mm shaft, 6.5 mm mounting holes 69.597 mm apart, Anaheim Automation, Leadshine, Lin Engineering and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
anaheim-34y-figures, engineersedge-ics16-inch-flanges, leadshine-cm-steppers, lin-8718s-05s-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...