17x60 Stepper Motor, NEMA ICS 16
NEMA 17, 60 mm body: the 17x60 stepper motor (NEMA ICS 16) has four M3 holes 30.982 mm apart, a 21.99894 mm pilot and a 5 mm shaft. Download it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 17x60 NEMA stepper, 17x60 hybrid stepper motor, 17x60 stepping motor
- Model id:
nema-steppers-17x60
- Standard: NEMA ICS 16 · size 17x60
Files
| Part key | Simplified |
|---|
nema-steppers-17x60 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 60 | | 60 | nominal | L0 (nom: one source) |
| BD | Body square | | 42.3 | | 42.3 | nominal | L1 |
| A | Mounting hole spacing | | 30.982 | | 30.982 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dt | Mounting hole thread | | 3 | | 3 | nominal | L1 |
| N | Pilot diameter | | 21.99894 | | 21.99894 | nominal | L1 |
| T | Pilot height | 0.762 | 2 | 2.286 | 2 | nominal | L1 |
| D | Shaft diameter | | 5 | | 5 | nominal | L1 |
| E | Shaft length | | 24 | | 24 | nominal | L1 |
| F | Shaft flat | | 4.5 | | 4.5 | nominal | L1 |
| Lf | Flat length | | 15 | | 15 | nominal | L1 |
Drawing

As a PDF: CC-NEMA-SZ-17x60.pdf.
The 17x60 stepper motor beside the 17x48 and the 23x41
The 17x60 is number 12 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 60 mm on the 17x60 stepper motor, against 48 mm on the 17x48 and 41 mm on the 23x41.
- Body square (BD): 42.3 mm on the 17x60 stepper motor, against 42.3 mm on the 17x48 and 56.4 mm on the 23x41.
- Mounting hole spacing (A): 30.982 mm on the 17x60 stepper motor, against 30.982 mm on the 17x48 and 47.146 mm on the 23x41.
- Number of mounting holes (nh): 4 on the 17x60 stepper motor, the same on the 17x48 and the 23x41.
- Mounting hole thread (dt): 3 mm on the 17x60 stepper motor, the same on the 17x48.
- Pilot diameter (N): 21.99894 mm on the 17x60 stepper motor, against 21.99894 mm on the 17x48 and 38.1 mm on the 23x41.
- Pilot height (T): 2 mm on the 17x60 stepper motor, against 2 mm on the 17x48 and 1.6 mm on the 23x41.
- Shaft diameter (D): 5 mm on the 17x60 stepper motor, against 5 mm on the 17x48 and 6.35 mm on the 23x41.
Other sizes
- One size smaller: 17x48 Stepper Motor, NEMA ICS 16, NEMA 17, 42.3 mm square, 48 mm long, 5 mm shaft, M3 mounting holes 30.982 mm apart, Leadshine and MOONS' data.
- One size larger: 23x41 Stepper Motor, NEMA ICS 16, NEMA 23, 56.4 mm square, 41 mm long, 6.35 mm shaft, 5.207 mm mounting holes 47.146 mm apart, Anaheim Automation, Leadshine and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
engineersedge-ics16-inch-flanges, engineersedge-ics16-inch-shafts, leadshine-cm-steppers, leadshine-cm-steppers-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...