23x41 Stepper Motor, NEMA ICS 16
The 23x41 stepper motor (NEMA ICS 16) is a NEMA 23 frame: a body 56.4 mm square and 41 mm long, four 5.207 mm holes 47.146 mm apart, a 38.1 mm pilot and a 6.35 mm shaft 21 mm long. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 23x41 NEMA stepper, 23x41 hybrid stepper motor, 23x41 stepping motor
- Model id:
nema-steppers-23x41
- Standard: NEMA ICS 16 · size 23x41
Files
| Part key | Simplified |
|---|
nema-steppers-23x41 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| L | Body length | | 41 | | 41 | nominal | L0 (nom: one source) |
| BD | Body square | | 56.4 | | 56.4 | nominal | L1 |
| A | Mounting hole spacing | | 47.146 | | 47.146 | nominal | L1 |
| nh | Number of mounting holes | | 4 | | 4 | nominal | L1 |
| dh | Mounting hole diameter | | 5.207 | | 5.207 | nominal | L1 |
| N | Pilot diameter | | 38.1 | | 38.1 | nominal | L1 |
| T | Pilot height | 1.524 | 1.6 | 3.302 | 1.6 | nominal | L1 |
| D | Shaft diameter | | 6.35 | | 6.35 | nominal | L1 |
| E | Shaft length | | 21 | | 21 | nominal | L1 |
| F | Shaft flat | | 5.8 | | 5.8 | nominal | L0 (nom: one source) |
| Lf | Flat length | | 15 | | 15 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-NEMA-SZ-23x41.pdf.
The 23x41 stepper motor beside the 17x60 and the 23x55
The 23x41 is number 13 of the 19 NEMA ICS 16 stepper motors published here, listed from 8x30 to 34x118.
- Body length (L): 41 mm on the 23x41 stepper motor, against 60 mm on the 17x60 and 55 mm on the 23x55.
- Body square (BD): 56.4 mm on the 23x41 stepper motor, against 42.3 mm on the 17x60 and 56.4 mm on the 23x55.
- Mounting hole spacing (A): 47.146 mm on the 23x41 stepper motor, against 30.982 mm on the 17x60 and 47.146 mm on the 23x55.
- Number of mounting holes (nh): 4 on the 23x41 stepper motor, the same on the 17x60 and the 23x55.
- Mounting hole diameter (dh): 5.207 mm on the 23x41 stepper motor, the same on the 23x55.
- Pilot diameter (N): 38.1 mm on the 23x41 stepper motor, against 21.99894 mm on the 17x60 and 38.1 mm on the 23x55.
- Pilot height (T): 1.6 mm on the 23x41 stepper motor, against 2 mm on the 17x60 and 1.6 mm on the 23x55.
- Shaft diameter (D): 6.35 mm on the 23x41 stepper motor, against 5 mm on the 17x60 and 6.35 mm on the 23x55.
Other sizes
- One size smaller: 17x60 Stepper Motor, NEMA ICS 16, NEMA 17, 42.3 mm square, 60 mm long, 5 mm shaft, M3 mounting holes 30.982 mm apart, Leadshine and MOONS' data.
- One size larger: 23x55 Stepper Motor, NEMA ICS 16, NEMA 23, 56.4 mm square, 55 mm long, 6.35 mm shaft, 5.207 mm mounting holes 47.146 mm apart, Anaheim Automation, Leadshine and MOONS' data.
Conventions
- STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
Documents
Sources
anaheim-23y, engineersedge-ics16-inch-flanges, engineersedge-ics16-inch-shafts, leadshine-cm-steppers-figures, moons-hybrid-steppers, rule-nema-steppers-hole-spacing, rule-nema-steppers-length. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...