The 9-EXT micro metal gearmotor (N20 gearmotor, extended rear shaft) has a gearbox 12 × 10 mm and 9 mm long on a motor 15.1 mm long; the output is a 3 mm D-shaft, 2.5 mm across the flat and 10 mm long. It mounts by two M1.6 holes 9 mm apart. A rear shaft 1 mm across sticks out 5 mm. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 9-EXT micro gear motor, 9-EXT mini gearmotor, 9-EXT small DC gear motor
- Model id:
gearmotors-n20-9-ext
- Standard: N20 gearmotor · size 9
Files
| Part key | Simplified |
|---|
gearmotors-n20-9-ext | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| W | Gearbox width | | 12 | | 12 | nominal | L1 |
| H | Gearbox height | | 10 | | 10 | nominal | L1 |
| Lg | Gearbox length | | 9 | | 9 | nominal | L1 |
| Lm | Motor length | | 15.1 | | 15.1 | nominal | L1 |
| OL | Overall length | | | 25.6 | 25.6 | single limit (max), modeled at the limit | L0 (max: one source) |
| Dm | Motor width | | 12 | | 12 | nominal | L1 |
| E | Shaft length | | 10 | | 10 | nominal | L1 |
| d | Shaft diameter | | 3 | | 3 | nominal | L1 |
| f | Shaft across the flat | | 2.5 | | 2.5 | nominal | L1 |
| B | Front boss diameter | | 4 | | 4 | nominal | L1 |
| h | Front boss height | | 0.8 | | 0.8 | nominal | L1 |
| dt | Mounting hole thread | | 1.6 | | 1.6 | nominal | L1 |
| nh | Number of mounting holes | | 2 | | 2 | nominal | L1 |
| e | Mounting hole offset | | 4.5 | | 4.5 | nominal | L0 (nom: one source) |
| A | Mounting hole spacing | | 9 | | 9 | nominal | L1 |
| Br | Rear boss diameter | | 5 | | 5 | nominal | L1 |
| hr | Rear end height | | 1.2 | | 1.2 | nominal | L1 |
| dr | Rear shaft diameter | | 1 | | 1 | nominal | L0 (nom: one source) |
| lr | Rear shaft length | | 5 | | 5 | nominal | L0 (nom: one source) |
| pt | Terminal spacing | | 6.9 | | 6.9 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-N20-SZ-9.pdf.
What each maker states
- Motor can length Lm: the makers differ (the GA12-N20 sheet 15 mm, Motraxx 15.1 mm, Pololu 15 mm, TT Motor 15 mm). The model uses the largest stated, 15.1 mm, so a mount or enclosure made to it clears every maker's motor.
- Front boss height h: the makers differ (the GA12-N20 sheet 0.7 mm, Motraxx 0.7 mm, Pololu 0.7 mm, TT Motor 0.8 mm). The model uses the largest stated, 0.8 mm, so a mount or enclosure made to it clears every maker's motor.
- This size's can is 15.1 mm. Motraxx's 15.1 mm can is drawn on its 9 mm box only, so the 12.5 mm box's can is 15 mm, though the motor behind both boxes is the same. Left at the defaults of the open decision (#1372); check your own motor's can if it matters.
The 9-EXT is the first of the 2 N20 gearmotor micro metal gearmotors published here, listed from 9-EXT to 12.5-EXT.
- Gearbox width (W): 12 mm on the 9-EXT micro metal gearmotor, the same on the 12.5-EXT.
- Gearbox height (H): 10 mm on the 9-EXT micro metal gearmotor, the same on the 12.5-EXT.
- Gearbox length (Lg): 9 mm on the 9-EXT micro metal gearmotor, against 12.5 mm on the 12.5-EXT.
- Motor length (Lm): 15.1 mm on the 9-EXT micro metal gearmotor, against 15 mm on the 12.5-EXT.
- Overall length (OL): up to 25.6 mm on the 9-EXT micro metal gearmotor, against up to 29.1 mm on the 12.5-EXT.
- Motor width (Dm): 12 mm on the 9-EXT micro metal gearmotor, the same on the 12.5-EXT.
- Shaft length (E): 10 mm on the 9-EXT micro metal gearmotor, the same on the 12.5-EXT.
- Shaft diameter (d): 3 mm on the 9-EXT micro metal gearmotor, the same on the 12.5-EXT.
Other sizes
Conventions
- Simplified only: eight solids, the gearbox, the gears, the can, the end cap, two solder tabs, the polarity dot and the shaft (nine with the extended rear shaft). STEP AP214, millimetres, the gearbox's front face at Z = 0 centred on the shaft's axis, the shaft along +Z.
- The gearbox's front face at Z = 0, the shaft along +Z, the motor toward -Z, the mounting holes on the X axis; tapped holes are plain bores at the thread's nominal diameter.
Documents
Sources
handsontec-ga12-n20, handsontec-ga12-n20-figures, motraxx-gm12f-n20vs-298-figures, pololu-micro-metal-gearmotors, ttmotor-gm12-n20va, ttmotor-gm12-n20va-figures. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...