51108 Thrust Bearing, ISO 104
The 51108 thrust bearing (ISO 104) has a 40 mm bore, a 60 mm outside diameter and a height of 13 mm. Get it as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 51108 thrust ball bearing, 51108 axial ball bearing, 51108 axial bearing
- Model id:
iso104-51108
- Standard: ISO 104 · size 51108
Files
| Part key | Simplified |
|---|
iso104-51108 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Shaft washer bore diameter | | 40 | | 40 | nominal | L1 |
| D | Housing washer outside diameter | | 60 | | 60 | nominal | L1 |
| T | Height | | 13 | | 13 | nominal | L1 |
| r | Chamfer dimension | 0.6 | | | 0.6 | single limit (min), modeled at the limit | L1 |
| d1 | Shaft washer outside diameter | | 60 ref | | 60 | reference value | L1 |
| D1 | Housing washer bore diameter | | 42 ref | | 42 | reference value | L1 |
Drawing

As a PDF: CC-ISO104-SZ-51108.pdf.
The 51108 thrust bearing beside the 51107
The 51108 is the last of the 9 ISO 104 thrust bearings published here, listed from 51100 to 51108.
- Shaft washer bore diameter (d): 40 mm on the 51108 thrust bearing, against 35 mm on the 51107.
- Housing washer outside diameter (D): 60 mm on the 51108 thrust bearing, against 52 mm on the 51107.
- Height (T): 13 mm on the 51108 thrust bearing, against 12 mm on the 51107.
- Chamfer dimension (r): at least 0.6 mm on the 51108 thrust bearing, the same on the 51107.
- Shaft washer outside diameter (d1): 60 mm (reference) on the 51108 thrust bearing, against 52 mm (reference) on the 51107.
- Housing washer bore diameter (D1): 42 mm (reference) on the 51108 thrust bearing, against 37 mm (reference) on the 51107.
Other sizes
Conventions
- Simplified only: two washers joined by a web, internals not modeled, no balls or cage. STEP AP214, millimetres, Z along the axis, the housing washer's back face at Z = 0.
- Shaft washer bore d, housing washer outside diameter D and height T at their nominals; washers concentric, the housing washer's back face at Z = 0.
- A solid web joins the washers in the middle half of the band between D1 and d1; balls, cage and raceway grooves not modeled.
Documents
Sources
nsk-thrust, ntn-bearingfinder-thrust, skf-17000-thrust. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...