51108 Thrust Bearing, ISO 104 size drawing (PDF)

Datasheet — 51108 Thrust Bearing, ISO 104 by Milo

Open the PDF
51108 Thrust Bearing, ISO 104Get the CAD model51108 Thrust Bearing, ISO 104CC-ISO104-SZ-51108.pdf

Text of this datasheet

ISO 104 single direction thrust ball bearing, 51108

Size drawing - 51108 values on the views - enlarged 2:1

Bearing

51108 13 60.000 ref 42.000 ref

d1 = 60.000 ref

Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L16. Notes 2 r: the sources give r_s min only; modeled at that limit. ref d1, D1: the makers' approximate values (=), modeled as given. D1 = 42.000 ref a Washer thickness, the web and the corners are house conventions, sheet D02.

TITLE

'? CommunityCAD Size drawing, 51108

d1 = 60.000 ref ‘STANDARDS FOLLOWED FAMILY / DETAIL ISO 104 (edition not printed by the sources) Thrust ball bearing - 51108

SHEET REV SCALE PROJECTION UNITS CC-1S80104-SZ-51108 A 2:1 € Dimensions in mm

SPEC VERSION LICENSE PAGE c964ffabe3a887708eb3e6e0cal8e3b2147b3b9c CC-BY 4.0 IronPixel Labs LLC 1/1

View from above

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.