51105 Thrust Bearing, ISO 104
For a 25 mm shaft and a 42 mm housing bore, the 51105 thrust bearing (ISO 104) is 11 mm high. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 51105 thrust ball bearing, 51105 axial ball bearing, 51105 axial bearing
- Model id:
iso104-51105
- Standard: ISO 104 · size 51105
Files
| Part key | Simplified |
|---|
iso104-51105 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Shaft washer bore diameter | | 25 | | 25 | nominal | L1 |
| D | Housing washer outside diameter | | 42 | | 42 | nominal | L1 |
| T | Height | | 11 | | 11 | nominal | L1 |
| r | Chamfer dimension | 0.6 | | | 0.6 | single limit (min), modeled at the limit | L1 |
| d1 | Shaft washer outside diameter | | 42 ref | | 42 | reference value | L1 |
| D1 | Housing washer bore diameter | | 26 ref | | 26 | reference value | L1 |
Drawing

As a PDF: CC-ISO104-SZ-51105.pdf.
The 51105 thrust bearing beside the 51104 and the 51106
The 51105 is number 6 of the 9 ISO 104 thrust bearings published here, listed from 51100 to 51108.
- Shaft washer bore diameter (d): 25 mm on the 51105 thrust bearing, against 20 mm on the 51104 and 30 mm on the 51106.
- Housing washer outside diameter (D): 42 mm on the 51105 thrust bearing, against 35 mm on the 51104 and 47 mm on the 51106.
- Height (T): 11 mm on the 51105 thrust bearing, against 10 mm on the 51104 and 11 mm on the 51106.
- Chamfer dimension (r): at least 0.6 mm on the 51105 thrust bearing, against at least 0.3 mm on the 51104 and at least 0.6 mm on the 51106.
- Shaft washer outside diameter (d1): 42 mm (reference) on the 51105 thrust bearing, against 35 mm (reference) on the 51104 and 47 mm (reference) on the 51106.
- Housing washer bore diameter (D1): 26 mm (reference) on the 51105 thrust bearing, against 21 mm (reference) on the 51104 and 32 mm (reference) on the 51106.
Other sizes
Conventions
- Simplified only: two washers joined by a web, internals not modeled, no balls or cage. STEP AP214, millimetres, Z along the axis, the housing washer's back face at Z = 0.
- Shaft washer bore d, housing washer outside diameter D and height T at their nominals; washers concentric, the housing washer's back face at Z = 0.
- A solid web joins the washers in the middle half of the band between D1 and d1; balls, cage and raceway grooves not modeled.
Documents
Sources
nsk-thrust, ntn-bearingfinder-thrust, skf-17000-thrust. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...