F694 Flanged Ball Bearing
For a 4 mm shaft and an 11 mm housing bore, the F694 flanged ball bearing (F and MF series) is 4 mm wide. Modeled as simplified STEP files. Its flange is 12.5 mm across and 1 mm thick.

How these parts are made, and what the levels mean: read the method
- Also known as: F694 flange bearing, F694 MF bearing, F694 F bearing, F694 flanged miniature bearing
- Model id:
bearings-miniature-flanged-f694
- Standard: F and MF series · size F694
Files
| Part key | Simplified |
|---|
bearings-miniature-flanged-f694 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 4 | | 4 | nominal | L1 |
| D | Outside diameter | | 11 | | 11 | nominal | L1 |
| B | Width | | 4 | | 4 | nominal | L1 |
| r | Chamfer dimension | 0.15 | | | 0.15 | single limit (min), modeled at the limit | L1 |
| D1 | Flange diameter | | 12.5 | | 12.5 | nominal | L1 |
| C1 | Flange width | | 1 | | 1 | nominal | L1 |
Drawing

As a PDF: CC-BRG-MINI-FL-SZ-F694.pdf.
The F694 flanged ball bearing beside the F684 and the F604
The F694 is number 12 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.
- Bore diameter (d): 4 mm on the F694 flanged ball bearing, the same on the F684 and the F604.
- Outside diameter (D): 11 mm on the F694 flanged ball bearing, against 9 mm on the F684 and 12 mm on the F604.
- Width (B): 4 mm on the F694 flanged ball bearing, against 2.5 mm on the F684 and 4 mm on the F604.
- Chamfer dimension (r): at least 0.15 mm on the F694 flanged ball bearing, against at least 0.1 mm on the F684 and at least 0.2 mm on the F604.
- Flange diameter (D1): 12.5 mm on the F694 flanged ball bearing, against 10.3 mm on the F684 and 13.5 mm on the F604.
- Flange width (C1): 1 mm on the F694 flanged ball bearing, against 0.6 mm on the F684 and 1 mm on the F604.
The F694 flanged ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nsk-miniature-flanged, ntn-bearingfinder-miniature-flanged. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...