F684 Flanged Ball Bearing
The F684 flanged ball bearing (F and MF series) has a 4 mm bore, a 9 mm outside diameter and a width of 2.5 mm. Get it as simplified STEP files. Its flange is 10.3 mm across and 0.6 mm thick.

How these parts are made, and what the levels mean: read the method
- Also known as: F684 flange bearing, F684 MF bearing, F684 F bearing, F684 flanged miniature bearing
- Model id:
bearings-miniature-flanged-f684
- Standard: F and MF series · size F684
Files
| Part key | Simplified |
|---|
bearings-miniature-flanged-f684 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Bore diameter | | 4 | | 4 | nominal | L1 |
| D | Outside diameter | | 9 | | 9 | nominal | L1 |
| B | Width | | 2.5 | | 2.5 | nominal | L1 |
| r | Chamfer dimension | 0.1 | | | 0.1 | single limit (min), modeled at the limit | L1 |
| D1 | Flange diameter | | 10.3 | | 10.3 | nominal | L1 |
| C1 | Flange width | | 0.6 | | 0.6 | nominal | L1 |
Drawing

As a PDF: CC-BRG-MINI-FL-SZ-F684.pdf.
The F684 flanged ball bearing beside the MF84 and the F694
The F684 is number 11 of the 39 F and MF series flanged ball bearings published here, listed from F682 to F689.
- Bore diameter (d): 4 mm on the F684 flanged ball bearing, the same on the MF84 and the F694.
- Outside diameter (D): 9 mm on the F684 flanged ball bearing, against 8 mm on the MF84 and 11 mm on the F694.
- Width (B): 2.5 mm on the F684 flanged ball bearing, against 2 mm on the MF84 and 4 mm on the F694.
- Chamfer dimension (r): at least 0.1 mm on the F684 flanged ball bearing, against at least 0.1 mm on the MF84 and at least 0.15 mm on the F694.
- Flange diameter (D1): 10.3 mm on the F684 flanged ball bearing, against 9.2 mm on the MF84 and 12.5 mm on the F694.
- Flange width (C1): 0.6 mm on the F684 flanged ball bearing, against 0.6 mm on the MF84 and 1 mm on the F694.
The F684 flanged ball bearing in its other versions
Other sizes
Conventions
- Simplified only: rings, flange, shield or seal face, no balls or cage. STEP AP214, millimetres, Z along the axis, the flange face at Z = 0.
- No markings; tolerance class, clearance and lubricant are not geometry.
- Bore d, outside diameter D and width B at the nominals of the product's own row (the shielded or sealed bearing's own width); rings concentric, faces flush.
Documents
Sources
nmb-miniature-flanged, nsk-miniature-flanged. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...