9x15 Shim Washer, DIN 988

STL Supports CommunityCAD0 downloads
9x15 Shim Washer, DIN 988
1 / 4

9x15 Shim Washer, DIN 988

Made for 9x15 screws, this shim washer (DIN 988) has a 9 mm hole and is 15 mm across. Download it as 6 lengths from 0.1 to 1.2 mm, each as simplified STEP.

9x15 × 1.2 shim washer, DIN 988

How these parts are made, and what the levels mean: read the method

  • Also known as: 9x15 shim ring, 9x15 precision shim, 9x15 Passscheibe, 9x15 x 0.1 to 9x15 x 1.2
  • Model id: din988-9x15
  • Standard: DIN 988:1990-03 · size 9x15

Lengths

Length (mm)Part keySimplified
0.1din988-9x15x0-1STEP
0.2din988-9x15x0-2STEP
0.3din988-9x15x0-3STEP
0.5din988-9x15x0-5STEP
1din988-9x15x1STEP
1.2din988-9x15x1-2STEP

Dimensions

Dimension symbols for 9x15 shim washers (DIN 988)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter99nominalL1
d2Outside diameter1515nominalL1

Drawing

Drawing of the 9x15 shim washer with its values (DIN 988)

As a PDF: CC-DIN988-SZ-9x15.pdf.

The 9x15 shim washer beside the 8x14 and the 10x16

The 9x15 is number 7 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

  • Inside diameter (d1): 9 mm on the 9x15 shim washer, against 8 mm on the 8x14 and 10 mm on the 10x16.
  • Outside diameter (d2): 15 mm on the 9x15 shim washer, against 14 mm on the 8x14 and 16 mm on the 10x16.

Other sizes

Conventions

  • Simplified only: a shim ring has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
  • Bore d1 and outside d2 at the midpoints of their ISO 286-2 bands, D12 wholly above the d1 nominal and d12 wholly below the d2 nominal.
  • Thickness h at its nominal, which is the maximum; one file per standard thickness.

Documents

Sources

fasten-it-din988, fasteners-eu-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN988-SZ-9x15.pdf

DIN 988 shim ring, 9x15 Size drawing - 9x15 values on the views - h = 1.2 shown (the thickest file) - enlarged 5:1 Sym. Dimensi 9x’ 9.115 9.04-9.19 di Bore, D12 (band middle) 14.86 14.77-14.95 ‘d2 = 14.86 Outside, d12 (band middle) 14.77-14.95 T 6.1 mm thickness, a file each e 0.2 mm 0.3 mm 6.5 mm…

View full datasheet →

docs/CC-DIN988-DS-9x15.pdf

CC-DIN988-DS-9x15 rev A Size datasheet - 9x15 '?) CommunityCAD DIN 988 9x15 shim ring Size datasheet: this size's values with their levels, conventions and sources. Fits a9Qmm shaft, ina 15 mm bore Thicknesses 01-0.2-0.3-0.5-1-1.2 mm CC] Part keys din988-9x15x0-1 ... din988- 9x15x1-2 Files 6 STEP…

View full datasheet →