5x10 Shim Washer, DIN 988

STL Supports CommunityCAD0 downloads
5x10 Shim Washer, DIN 988
1 / 4

5x10 Shim Washer, DIN 988

Made for 5x10 screws, this shim washer (DIN 988) has a 5 mm hole and is 10 mm across. Download it as 5 lengths from 0.1 to 1 mm, each as simplified STEP.

5x10 × 1 shim washer, DIN 988

How these parts are made, and what the levels mean: read the method

  • Also known as: 5x10 shim ring, 5x10 precision shim, 5x10 Passscheibe, 5x10 x 0.1 to 5x10 x 1
  • Model id: din988-5x10
  • Standard: DIN 988:1990-03 · size 5x10

Lengths

Length (mm)Part keySimplified
0.1din988-5x10x0-1STEP
0.2din988-5x10x0-2STEP
0.3din988-5x10x0-3STEP
0.5din988-5x10x0-5STEP
1din988-5x10x1STEP

Dimensions

Dimension symbols for 5x10 shim washers (DIN 988)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter55nominalL1
d2Outside diameter1010nominalL1

Drawing

Drawing of the 5x10 shim washer with its values (DIN 988)

As a PDF: CC-DIN988-SZ-5x10.pdf.

The 5x10 shim washer beside the 4x8 and the 6x12

The 5x10 is number 3 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

  • Inside diameter (d1): 5 mm on the 5x10 shim washer, against 4 mm on the 4x8 and 6 mm on the 6x12.
  • Outside diameter (d2): 10 mm on the 5x10 shim washer, against 8 mm on the 4x8 and 12 mm on the 6x12.

Other sizes

Conventions

  • Simplified only: a shim ring has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
  • Bore d1 and outside d2 at the midpoints of their ISO 286-2 bands, D12 wholly above the d1 nominal and d12 wholly below the d2 nominal.
  • Thickness h at its nominal, which is the maximum; one file per standard thickness.

Documents

Sources

fasten-it-din988, fasteners-eu-din988, schrauben-lexikon-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN988-DS-5x10.pdf

'?) CommunityCAD CC-DIN988-DS-5x10 rev A Size datasheet - 5x10 DIN 988 5x10 shim ring Size datasheet: this size's values with their levels, conventions and sources. Fits a5mm shaft, ina10 mm bore Thicknesses 01-0.2-0.3-0.5-1mm | Part keys din988-5x10x0-1 ... din988- 5x10x1 Files 5 STEP AP214…

View full datasheet →

docs/CC-DIN988-SZ-5x10.pdf

DIN 988 shim ring, 5x10 Size drawing - 5x10 values on the views - h = 1 shown (the thickest file) - enlarged 10:1 Sym. Dimensi 5x10 di Bore, D12 (band middle) 5.09 5.03-5.15 9.885 9.81-9.96 Outside, d12 (band middle) d2 = 9.885 9.81-9.96 0.1 thickness, a file each e 0.2 0.3 0.5 1 mm Source levels…

View full datasheet →