7x13 Shim Washer, DIN 988
Made for 7x13 screws, this shim washer (DIN 988) has a 7 mm hole and is 13 mm across. Download it as 3 lengths from 0.3 to 1 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also known as: 7x13 shim ring, 7x13 precision shim, 7x13 Passscheibe, 7x13 x 0.3 to 7x13 x 1
- Model id:
din988-7x13
- Standard: DIN 988:1990-03 · size 7x13
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 0.3 | din988-7x13x0-3 | STEP |
| 0.5 | din988-7x13x0-5 | STEP |
| 1 | din988-7x13x1 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d1 | Inside diameter | | 7 | | 7 | nominal | L1 |
| d2 | Outside diameter | | 13 | | 13 | nominal | L1 |
Drawing

As a PDF: CC-DIN988-SZ-7x13.pdf.
The 7x13 shim washer beside the 6x12 and the 8x14
The 7x13 is number 5 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.
- Inside diameter (d1): 7 mm on the 7x13 shim washer, against 6 mm on the 6x12 and 8 mm on the 8x14.
- Outside diameter (d2): 13 mm on the 7x13 shim washer, against 12 mm on the 6x12 and 14 mm on the 8x14.
Other sizes
Conventions
- Simplified only: a shim ring has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
- Bore d1 and outside d2 at the midpoints of their ISO 286-2 bands, D12 wholly above the d1 nominal and d12 wholly below the d2 nominal.
- Thickness h at its nominal, which is the maximum; one file per standard thickness.
Documents
Sources
fasten-it-din988, fasteners-eu-din988. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...