15x21 Shim Washer, DIN 988

STL Supports CommunityCAD0 downloads
15x21 Shim Washer, DIN 988
1 / 4

15x21 Shim Washer, DIN 988

Made for 15x21 screws, this shim washer (DIN 988) has a 15 mm hole and is 21 mm across. Download it as 8 lengths from 0.1 to 2 mm, each as simplified STEP.

15x21 × 2 shim washer, DIN 988

How these parts are made, and what the levels mean: read the method

  • Also known as: 15x21 shim ring, 15x21 precision shim, 15x21 Passscheibe, 15x21 x 0.1 to 15x21 x 2
  • Model id: din988-15x21
  • Standard: DIN 988:1990-03 · size 15x21

Lengths

Length (mm)Part keySimplified
0.1din988-15x21x0-1STEP
0.15din988-15x21x0-15STEP
0.2din988-15x21x0-2STEP
0.3din988-15x21x0-3STEP
0.5din988-15x21x0-5STEP
1din988-15x21x1STEP
1.5din988-15x21x1-5STEP
2din988-15x21x2STEP

Dimensions

Dimension symbols for 15x21 shim washers (DIN 988)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter1515nominalL1
d2Outside diameter2121nominalL1

Drawing

Drawing of the 15x21 shim washer with its values (DIN 988)

As a PDF: CC-DIN988-SZ-15x21.pdf.

The 15x21 shim washer beside the 14x20 and the 16x22

The 15x21 is number 13 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

  • Inside diameter (d1): 15 mm on the 15x21 shim washer, against 14 mm on the 14x20 and 16 mm on the 16x22.
  • Outside diameter (d2): 21 mm on the 15x21 shim washer, against 20 mm on the 14x20 and 22 mm on the 16x22.

Other sizes

Conventions

  • Simplified only: a shim ring has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
  • Bore d1 and outside d2 at the midpoints of their ISO 286-2 bands, D12 wholly above the d1 nominal and d12 wholly below the d2 nominal.
  • Thickness h at its nominal, which is the maximum; one file per standard thickness.

Documents

Sources

fasten-it-din988, fasteners-eu-din988, schrauben-lexikon-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN988-DS-15x21.pdf

'?) CommunityCAD CC-DIN988-DS-15x21 rev A Size datasheet - 15x21 DIN 988 15x21 shim ring Size datasheet: this size's values with their levels, conventions and sources. Fits a15 mm shaft, ina 21mm bore Thicknesses 0.1-0.15-0.2-0.3-0.5-1-1.5- a “nos din988-15x21x0-1 ... din988- Part keys 15x21x2…

View full datasheet →

docs/CC-DIN988-SZ-15x21.pdf

DIN 988 shim ring, 15x21 Size drawing - 15x21 values on the views - h = 2 shown (the thickest file) - enlarged 5:1 ‘d2 = 20.83 20.725-20.935 d1 = 15.14 15.05-15.23 d2 = 20.83 20.725-20.935 View from above Sym. Dimensi 15x21 15.14 15.05-15.23 di Bore, D12 (band middle) 20.83 20.725-20.935 Outside,…

View full datasheet →