11x17 Shim Washer, DIN 988

STL Supports CommunityCAD0 downloads
11x17 Shim Washer, DIN 988
1 / 4

11x17 Shim Washer, DIN 988

Made for 11x17 screws, this shim washer (DIN 988) has an 11 mm hole and is 17 mm across. Download it as 2 lengths from 0.2 to 1 mm, each as simplified STEP.

11x17 × 1 shim washer, DIN 988

How these parts are made, and what the levels mean: read the method

  • Also known as: 11x17 shim ring, 11x17 precision shim, 11x17 Passscheibe, 11x17 x 0.2 to 11x17 x 1
  • Model id: din988-11x17
  • Standard: DIN 988:1990-03 · size 11x17

Lengths

Length (mm)Part keySimplified
0.2din988-11x17x0-2STEP
1din988-11x17x1STEP

Dimensions

Dimension symbols for 11x17 shim washers (DIN 988)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter1111nominalL1
d2Outside diameter1717nominalL1

Drawing

Drawing of the 11x17 shim washer with its values (DIN 988)

As a PDF: CC-DIN988-SZ-11x17.pdf.

The 11x17 shim washer beside the 10x16 and the 12x18

The 11x17 is number 9 of the 18 DIN 988 shim washers published here, listed from 3x6 to 20x28.

  • Inside diameter (d1): 11 mm on the 11x17 shim washer, against 10 mm on the 10x16 and 12 mm on the 12x18.
  • Outside diameter (d2): 17 mm on the 11x17 shim washer, against 16 mm on the 10x16 and 18 mm on the 12x18.

Other sizes

Conventions

  • Simplified only: a shim ring has no thread, so there is one detail level. STEP AP214, millimetres, Z up, one face at Z = 0.
  • Bore d1 and outside d2 at the midpoints of their ISO 286-2 bands, D12 wholly above the d1 nominal and d12 wholly below the d2 nominal.
  • Thickness h at its nominal, which is the maximum; one file per standard thickness.

Documents

Sources

fasten-it-din988, fasteners-eu-din988. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN988-SZ-11x17.pdf

DIN 988 shim ring, 11x17 Size drawing - 11x17 values on the views - h = 1 shown (the thickest file) - enlarged 5:1 Dimension 11.14 11.05-11.23 Bore, D12 (band middle) 16.86 Outside, d12 (band middl ‘d2 = 16.86 esi UPSET) 16.77-16.95 16.77-16.95, T 6.2 mm thickness, a file each e 1 mm e Source…

View full datasheet →

docs/CC-DIN988-DS-11x17.pdf

* CC-DIN988-DS-11x17 rev A '?) CommunityCAD Size datasheet - 11x17 DIN 988 11x17 shim ring Size datasheet: this size's values with their levels, conventions and sources. Fits a 11mm shaft, in a 17 mm bore Thicknesses 0.2-1mm | Part keys din988-11x17x0-2 ... din988- 11x17x1 Files 2 STEP AP214…

View full datasheet →