M2 Serrated Lock Washer, DIN 6798, Form A (External Teeth)

STEP · STL Supports CommunityCAD0 downloads
M2 Serrated Lock Washer, DIN 6798, Form A (External Teeth)
1 / 4

M2 Serrated Lock Washer, DIN 6798, Form A (External Teeth)

Made for M2 screws, this serrated lock washer (DIN 6798, form A, external teeth) has a 2.2 mm hole and is 4.5 mm across, 0.3 mm thick. It has 9 teeth. Download it as simplified STEP files.

M2 serrated lock washer, form A (external teeth), DIN 6798

How these parts are made, and what the levels mean: read the method

  • Also known as: M2 tooth lock washer, M2 star washer
  • Model id: din6798-a-m2
  • Standard: DIN 6798:1988 · size M2

Files

Part keySimplified
din6798-a-m2STEP

Dimensions

Dimension symbols for M2 serrated lock washers (DIN 6798)

SymbolNameminnommaxModeledRuleLevel
d1Inside diameter2.22.22.342.2nominalL1
d2Outside diameter, forms A and J4.24.54.54.5nominalL1
s1Sheet thickness, forms A and J0.30.3nominalL1
teeth_ANumber of teeth, form A99single limit (min), modeled at the limitL1

Drawing

Drawing of the M2 serrated lock washer with its values (DIN 6798)

As a PDF: CC-DIN6798-SZ-M2.pdf.

Goes with the M2 serrated lock washer

The M2 form A serrated lock washer beside the M2.5

The M2 is the smallest of the 7 DIN 6798 serrated lock washers published here, from M2 to M8.

  • Inside diameter (d1): 2.2 mm on the M2 form A serrated lock washer, against 2.7 mm on the M2.5.
  • Outside diameter (d2): 4.5 mm on the M2 form A serrated lock washer, against 5.5 mm on the M2.5.
  • Sheet thickness (s1): 0.3 mm on the M2 form A serrated lock washer, against 0.4 mm on the M2.5.
  • Number of teeth (teeth_A): at least 9 on the M2 form A serrated lock washer, the same on the M2.5.

The M2 form A serrated lock washer in its other forms

Other sizes

Conventions

  • Simplified only: a washer has no thread, so there is one detail level. STEP AP214, millimetres, Z up, resting on Z = 0, the first tooth on +X.
  • Bore d1, outside diameter d2 and sheet thickness s1 at their nominals.
  • Forms A and J: each tooth turned about its radial centre line, right hand, so the envelope height is h = 3 s1, trimmed to the tooth-end circle.

Documents

Sources

engineersedge-din6798, fasten-it-din6798, globalfastener-din6798-a, globalfastener-din6798-j, globalfastener-din6798-v. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DIN6798-DS-M2.pdf

. CC-DIN6798-DS-M2 revA '?) CommunityCAD Size datasheet - M2 DIN 6798 M2 serrated lock washer Size datasheet: this size's values with their levels, conventions and sources, for its forms A, J and V. For M2 bolts and screws Part keys din6798-a-m2, din6798-j-m2, din6798-v-m2 Files 3 STEP AP214…

View full datasheet →

docs/CC-DIN6798-SZ-M2.pdf

DIN 6798 serrated lock washers, forms A, J and V, M2 Size drawing - M2 values on the views - enlarged 10:1 View from above Sym. Dimensi di Bore diameter, every form d2 Outside diameter, A and J si Sheet thickness, A and J d3 Outside diameter, V s2 Sheet thickness, V ZA Teeth, form A (min) zJ…

View full datasheet →