M2 Serrated Lock Washer, DIN 6798, Form A (External Teeth) size drawing (PDF)

Datasheet — M2 Serrated Lock Washer, DIN 6798, Form A (External Teeth) by Milo

Open the PDF
M2 Serrated Lock Washer, DIN 6798, Form A (External Teeth)Get the CAD modelM2 Serrated Lock Washer, DIN 6798, Form A (External Teeth)CC-DIN6798-SZ-M2.pdf

Text of this datasheet

DIN 6798 serrated lock washers, forms A, J and V, M2

Size drawing - M2 values on the views - enlarged 10:1

View from above

Sym. Dimensi

di Bore diameter, every form

d2 Outside diameter, A and J

si Sheet thickness, A and J

d3 Outside diameter, V

s2 Sheet thickness, V

ZA Teeth, form A (min)

zJ Teeth, form J (min)

ZV Teeth, form V (min)

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18.

Notes

The views show form A; forms J and V on sheet DO1, the strip is form A.

ZA, zJ, zV: each form's minimum tooth count, modeled at that limit.

h is the generated washer's height: 3 s1 for A and J, the 90 degree cone for V.

Teeth, twist and cone: house conventions from the owner's #577 and #673 answers, DO2.

TITLE

'? CommunityCAD Size drawing, M2

‘STANDARDS FOLLOWED DIN 6798:1988

FAMILY / DETAIL

Serrated lock washer - M2

SHEET

CC-DIN6798-SZ-M2

REV SCALE PROJECTION

A 10:1

UNITS

Dimensions in mm

SPEC VERSION

LICENSE

cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC

PAGE

1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.