30 mm Fan Guard, Wire

STEP · STL Supports CommunityCAD0 downloads
30 mm Fan Guard, Wire
1 / 6

30 mm Fan Guard, Wire

The 30 fan guard (Wire fan guard) bolts on through four 3.2 mm eyelets 24 mm apart; its outer ring is 21.8 mm across and it stands 4.8 mm high. It comes as simplified STEP files.

30 fan guard, Wire fan guard

How these parts are made, and what the levels mean: read the method

  • Also known as: 30 fan grill, 30 finger guard, 30 wire fan grille
  • Model id: fan-guards-30
  • Standard: Wire fan guard · size 30

Files

Part keySimplified
fan-guards-30STEP

Dimensions

Dimension symbols for 30 fan guards (Wire fan guard)

SymbolNameminnommaxModeledRuleLevel
eMounting hole spacing2424nominalL1
dhMounting hole diameter3.23.2nominalL1
DOutside ring diameter21.821.8nominalL0 (nom: one source)
hGuard height4.84.8nominalL1
d_ringRing wire diameter1.61.6nominalL0 (nom: one source)
d_ribRib wire diameter1.61.6nominalL0 (nom: one source)

Drawing

Drawing of the 30 fan guard with its values (Wire fan guard)

As a PDF: CC-FANGUARD-SZ-30.pdf.

The 30 fan guard beside the 40

The 30 is the first of the 6 Wire fan guards published here, listed from 30 to 120.

  • Mounting hole spacing (e): 24 mm on the 30 fan guard, against 32 mm on the 40.
  • Mounting hole diameter (dh): 3.2 mm on the 30 fan guard, against 4 mm on the 40.
  • Outside ring diameter (D): 21.8 mm on the 30 fan guard, against 31.5 mm on the 40.
  • Guard height (h): 4.8 mm on the 30 fan guard, the same on the 40.
  • Ring wire diameter (d_ring): 1.6 mm on the 30 fan guard, against 1.8 mm on the 40.
  • Rib wire diameter (d_rib): 1.6 mm on the 30 fan guard, against 2.2 mm on the 40.

Other sizes

Conventions

  • Simplified only: one solid of wire rings, ribs and eyelets. STEP AP214, millimetres, Z along the guard axis, mounting face at Z = 0, ring tops at Z = h.
  • Wire layout illustrative, not any maker's design; hole pattern, outside diameter, height and wire sizes from maker drawings.

Documents

Sources

qualtek-fan-guards, sepa-fan-guards. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-FANGUARD-DS-30.pdf

CC-FANGUARD-DS-30 revA Size datasheet - 30 '?) CommunityCAD 30 mm wire fan guard Size datasheet: this guard's values with their levels, conventions and sources. Wire layout illustrative, not any maker's design; hole pattern, outside diameter, height and wire sizes from maker drawings. Fits 30 mm…

View full datasheet →

docs/CC-FANGUARD-SZ-30.pdf

Wire fan guard, square DC axial fans, 30 Size drawing - 30 values on the views - enlarged 2:1 Sym. Dimensi Hole spacing dh Hole diameter (eyelet inside) Outside ring diameter Height dring = 1.6* . dring Ring wire diameter drib — Rib wire diameter Source levels Main value = the modeled value…

View full datasheet →